D-Link DAP-1160 Quick Installation Manual page 4

WARNING! The DAP-1160's power output is 5 volts DC,  Ampere. Use only
the power adapter supplied with this DAP-1160 or one with the same power
specifications. Using a power adapter with a different voltage or plugging your
DAP-1160 to a wrong AC voltage outlet will damage this device and will void
the warranty for this product.
Ethernet LAN Ports
Can be connected to Ethernet ports
of computers, or to an Ethernet
switch or LAN port of a router.
Step : Connect the Antenna and Ethernet Cable.
Connect the antenna to the antenna connector on the back of the DAP-1160.
Connect one end of the Ethernet cable to either one of the two LAN ports on the
back panel of the DAP-1160, and the other end of this cable to your computer's
Ethernet port. If your computer is connected to an Ethernet network via an Ethernet
switch, connect this end of the cable the switch's port.
Power Socket
Connect to a 5VDC 2A power
adapter.