Controlling The Temperature; Energy Saver; Controlling The Freezer Temperature - Samsung RF268ABBP Quick Start Manual

Energy saver

This icon will light up when you press the Energy Saver button. The Energy Saver function is automatically set to "ON"
when power is supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver mode off.
Lighting
This icon will light up when you press the Lighting button. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser,
turn the Lighting mode off.
Alarm
This icon will light up when you press the Alarm button. The door alarm will sound if any door is open for more
than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Fridge Ice off
This icon will light up when you press the Fridge Ice Off button. In this case, the fridge ice will not be produced.
Freezer Ice off
This icon will light up when you press the Freezer Ice Off button. In this case, the freezer ice will not be
produced.
• As this refrigerator has a dual Ice Maker, there is a possibility of using more energy. We recommend if you
have enough ice, set Ice Off to save energy.
• You may occasionally hear noises from Ice dropping or water flowing to the icemaker. These noises are
part of normal operation.
Lock
This icon will light up when you press the Lock button. In this case, you won't be able to use the control panel. If you
press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use the control panel again.

CONTROLLING THE TEMPERATURE

Basic temperature of Freezer and Refrigerator Compartments
The basic temperature and/or recommended temperatures of the Freezer and Refrigerator Compartments are
-2°F and 38°F respectively.
If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between 8°F and -8°F to suit
your particular needs. Press the Freezer button repeatedly until
the desired temperature is shown in the temperature display. The
temperature will move 2°F degrees with each press (-2°F → -4°F →
-6°F → -8°F → 8°F → 6°F → 4°F → 2°F → 0°F → -2°F). Keep in mind
that foods like ice cream may melt at 4°F. The temperature display
will move sequentially from -8°F to 8°F. Five seconds after the new
temperature is set, the display will show the actual current freezer
temperature until the new temperature is reached.
Using the Power Freeze
If you need a lot of ice or if you want to cool down the freezer
faster, you can use the Power Freezer function. Press and hold
the Freezer/ Hold 3 sec for Power Freezer button for 3 seconds.
Then, the power freeze indicator will light and activate the power
freeze mode independent of the freezer set temperature. If you
select Power freeze, the inside temperature of the freezer will
decrease for about two and a half hours. When you have enough
ice, just press and hold the button for 3 seconds again to cancel the
Power Freeze mode. Then, the indicator will go out and the freezer
will return to the set temperature again.