Download
Share
Print this page
LIGHT MY BRICKS LEGO Winter Village Fire Station 10263 Lighting Kit Instructions Manual
  1. Manuals
  2. Brands
  3. LIGHT MY BRICKS Manuals
  4. Lighting Equipment
  5. LEGO Winter Village Fire Station 10263 Lighting...
  6. Instructions manual

LIGHT MY BRICKS LEGO Winter Village Fire Station 10263 Lighting Kit Instructions Manual

Hide thumbs Also See for LEGO Winter Village Fire Station 10263 Lighting Kit:

Advertisement

Quick Links

Download this manual
Light My Bricks: LEGO Winter Village
Fire Station 10263 Lighting Kit
The following page is the instructions for the
Light My Bricks LEGO Winter
Village Fire Station (10263) LED light kit.
If you run into any issues, please refer to the
online troubleshooting guide.
To ensure a trouble-free installation of your light kit, please read and follow
each step carefully. These instructions can be downloaded in PDF format
here
Please note: This page lists instructions for the LED light kit only. If you are
wishing to purchase the Light My Bricks LEGO Winter Village Fire Station
(10263) LED light kit , please click
here
to view the product page

Advertisement

loading
Need help?

Need help?

Do you have a question about the LEGO Winter Village Fire Station 10263 Lighting Kit and is the answer not in the manual?

Questions and answers

Related Manuals for LIGHT MY BRICKS LEGO Winter Village Fire Station 10263 Lighting Kit

Summary of Contents for LIGHT MY BRICKS LEGO Winter Village Fire Station 10263 Lighting Kit

  • Page 1 These instructions can be downloaded in PDF format here Please note: This page lists instructions for the LED light kit only. If you are wishing to purchase the Light My Bricks LEGO Winter Village Fire Station (10263) LED light kit , please click here...

  • Page 2: Package Contents

    Package Contents: 2x White 30cm Bit Lights 9x White 15cm Bit Lights 10x Flashing White 15cm Bit Lights 3x White Strip Lights 1x Blue Strip Light 4x 6-Port Expansion Board 1x 8-Port Expansion Boards 1x 5cm Connecting Cable 3x 15cm Connecting Cables 1x 30cm Connecting Cables 2x 50cm Connecting Cables 1x AA Battery Pack (requires 3x AA Batteries)
  • Page 3 Important things to note: Laying cables in between and underneath bricks Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables; instead ensure they are laying comfortably in between each stud.
  • Page 4 with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do not force it. Incorrectly inserting the connector can can result in bent pins inside the port or possible overheating of the expansion board when connected.
  • Page 5 Installing Bit Lights under LEGO® bricks and plates. When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed). You can either place them directly on top of LEGO® studs or in between. OK, Let’s Begin! Installing lights to the Fire Truck 1.) We will first install head and tail lights to the fire truck.
  • Page 6 Take a White 15cm Bit Light and thread the connector end of the cable through the front of one of the side pieces. Thread the cable all the way through, then flatten the Bit Light against the edge of the round stud. Secure the Bit Light in place by connecting a provided Trans Yellow Round Plate 1×1 over the top.
  • Page 7 Repeat this step to install another White 15cm Bit Light to the other side, securing it in place using another provided Trans Yellow Round Plate 1×1.
  • Page 8 2.) Flip this front section over then take the cable from the right side and fold it over to the left side before reconnecting this section back to the front of the vehicle. Ensure that both cables are laid toward the left. Flip the truck over and lay it on its left side.
  • Page 9 behind the front right wheel 3.) Turn the truck around and disconnect the black 2×12 plate from underneath, then disconnect the back wheel section Disconnect the tail light section from the back wheel then disconnect the two...
  • Page 10 trans red round tiles. 4.) Take a White 15cm Bit Light and with the cable facing down, place it over the left stud as shown below. Secure the Bit Light in place by connecting a provided Trans Red Round Plate 1×1 over the top.
  • Page 11 Repeat this step to install another White 15cm Bit Light to the right side using another Trans Red Round Plate 1×1 to secure the Bit Light in place. 5.) Fold both cables underneath the this section then reconnect it to the back wheel.
  • Page 12 Take both tail light cables and twist/wind them around each other 3-4 times at the edge of the plate. Continue to wind the cables around each other all the way to the ends, then repeat this step to twist/wind the cables from the headlights. 6.) Lay the two thicker cables underneath the truck, then reconnect the black 2×12 plate over the top ensuring the cables are laid in between studs as shown below.
  • Page 13 The headlight cables should be laid out toward the left side of the truck and the tail light cables should be laid out toward the right side. From the left side of the truck, tuck the head light cables toward the inside of the front wheels, then flip the car around.
  • Page 14 7.) Take a 6-Port Expansion Board and connect all four Bit Light cables to it. Take 2x Adhesive Squares and stick them to the flat side of the expansion board, then mount the expansion board underneath the truck in the following position 8.) Take the Flat Battery Pack and insert 2x CR2032 Batteries inside.
  • Page 15 the battery pack cable to the expansion board and turn it ON to test that all four lights are working OK. Stick another 2x Adhesive Squares underneath the Flat Battery Pack (side with screws) then twist/wind the battery pack cable before mounting the battery pack underneath the Truck as per below.
  • Page 16 This completes installation of the Fire Truck lights. Installing Lights to the Fire Station and external sections. 1.) We will first install lights to the lamp post beside the bench. Disconnect the lamp post then remove and disassemble the top section as per below.
  • Page 17 Take a White 30cm Bit Light and thread the connector side of the cable through the bottom of one of the lamps. Thread the cable all the way through until the Bit Light is up inside of the trans yellow round brick.
  • Page 18 Carefully and slowly reconnect the black tap piece to the top ensuring the bit light is facing the left side of the lamp (This is so the light is shining the correct way when reconnected to the lamp). Important Note: Do not forcefully push the tap piece as this may break the cable.
  • Page 19 3.) Repeat previous steps to install another White 30cm Bit Light to the right lamp ensuring the bit light is facing the right side of the lamp when reconnecting the black tap piece.
  • Page 20 4.) Reconnect this section (with lights installed) back to the lamp post then from the back, twist/wind the two cables around each other all the way to the end so that they both come together to form one larger cable.
  • Page 21 Reconnect the lamp post back to the base (next to the bench) and while doing so, lay the cable underneath the lamp post base and then out toward the back (in between studs).
  • Page 22 Place this section on the left side of the Fire Station. Leave this section for now as we will connect up the lights at a later stage. 5.) We will now move onto lighting the Ice Rink. First take a Blue Strip Light and connect a 50cm Connecting Cable to the right side.
  • Page 23 Using its adhesive backing, stick the strip light behind the front feature as close to the bottom as you can. The strip light will project down and illuminate the trans light blue tiles. The cable should be facing the left side of the rink. 6.) Disconnect the following pieces on the front left of the rink, then lay the cable from the strip light down in between studs.
  • Page 24 Bring cable up the side and toward the back of the rink. Disconnect the following pieces on the back left then lay the cable down in between studs. Reconnect pieces over the top. "...
  • Page 25 Place the ice rink in the following position outside the front left of the Fire Station. Leave the cable disconnected for now as we will connect this up at a later stage. 7.) We will now install lights to the christmas tree. Take this section and disconnect the four sides as well as the star section from the top of the tree as shown below:...
  • Page 26 Disconnect the black 1×1 brick underneath the star section, then take a Flashing White 15cm Bit Light and thread the connector end of the cable through the top of the 1×1 brick. Thread the cable all the way through, then flatten the Bit Light so that it sits flat against the edge of the brick.
  • Page 27 Reconnect this section back to the top of the tree, then reconnect the star section. 8.) Take one of the tree’s side sections and disconnect the following pieces.
  • Page 28 Take a Flashing White 15cm Bit Light and with the cable facing the bottom of the tree, place it over the following stud. Secure the Bit Light in place by connecting a provided Trans Red Round Plate 1×1 over the top. Lay the cable in between studs before reconnecting the green 1×4 plate.
  • Page 29 Lay the cable toward the bottom of the tree in between studs, then reconnect the following section over the top as shown below: Reconnect this side section back to the tree, ensuring all cables are neatly laid down the side toward the bottom. 10.) Repeat the previous 2 steps to install another 2x Flashing White 15cm Bit Lights to another side section of the tree, securing them in place using another provided Trans Red Round Plate 1×1 and Trans Yellow Round Plate 1×1.
  • Page 31 Reconnect this section to the opposite side of the tree where you reconnected the first side section. 11.) Take another side section of the tree and disconnect the following pieces:...
  • Page 32 Take a Flashing White 15cm Bit Light and with the cable facing toward the bottom of the tree, place it over the very top stud of this section. Secure the Bit Light in place by connecting a provided Trans Green Round Plate 1×1 over the top.
  • Page 33 12.) Take another Flashing White 15cm Bit Light and place it over the following stud. Secure the Bit Light in place by connecting a provided Trans Blue Round Plate 1×1 over the top. Lay the cable down toward the bottom of the tree, in between the following studs, then reconnect the following section over the top.
  • Page 34 Reconnect this side section to the christmas tree. 13.) Repeat the previous two steps to install another 2x Flashing White 15cm Bit Lights to the remaining side section of the tree, securing them in place using another provided Trans Green Round Plate 1×1 and Trans Blue Round Plate 1×1.
  • Page 36 Reconnect this section to the remaining open side of the tree 14.) Group all eight cables together behind the tree, then twist/wind the cables around each other so they all come together forming one larger cable.
  • Page 37 Take 2x 6-Port Expansion Boards and connect the five shorter cables to one expansion board, then connect the other three to the other expansion board.
  • Page 38 Connect the two expansion boards together using another 5cm Connecting Cable.
  • Page 39 Take the AA Battery Pack and insert 3x AA Batteries to it. Connect the battery pack cable to a spare port on the 6-port expansion board, then turn the battery pack ON to test the christmas tree lights are working OK. 15.) Disconnect the Battery Pack cable from the expansion board and connect one end of a 50cm Connecting Cable to it instead.
  • Page 40 Stick both expansion boards down onto the adhesive squares then neaten up cabling by pushing them down. The components and cables should be neatly hidden behind and not too obvious from the front of the tree. Place the tree on the right side of the Fire Station. Leave the other end of the 50cm Connecting Cable disconnected for now as we will connect it up at a later stage.
  • Page 41 16.) We will now install lights to the Fire Station, starting with the alarm at the front right of the building. First disconnect the roof then disconnect the alarm section including the light grey 1×2 tile with stud behind.
  • Page 42 Disassemble this section as shown below then take a Flashing White 15cm Bit Light and with the cable facing behind, place it over the red stud. Secure the Bit Light in place by reconnecting the trans blue round plate over the top.
  • Page 43 Take the other end of the bit light cable and thread it through the back of this section and then out the bottom as shown below: Reconnect this section back to the light grey 1×2 tile with stud then thread the cable through the left hole that leads into the inside of the Fire Station.
  • Page 44 17.) We will now install a strip light just above the front entrance. Using your LEGO removal tool, create a gap above the light grey bricks as shown below: From the inside of the building, take the other end of the flashing white bit light from the alarm and thread it through the gap we just created (in between studs).
  • Page 45 18.) Take a 15cm Connecting Cable and connect it to the Strip Light’s left port then using it’s adhesive backing, stick the strip light underneath the roof just above the front door as shown below:...
  • Page 46 Take the other end of the 15cm connecting cable and thread it through the gap and pull it all the way out from the inside of the building. Pull the excess cable from the flashing white bit light (connected to the strip light) back inside the building then with both cables in between studs, close up the gap we created (above the front entrance).
  • Page 47 From the inside of the building tuck the excess cable from the flashing white bit light up into the top left to ensure the front doors can open without the cable getting caught. 19.) Take a White Strip Light and using it’s adhesive backing, stick it into the base of a provided Plate 1×6.
  • Page 48 Take the other end of the 15cm Connecting Cable from the strip light out the front and connect it to this Strip Light. Take a new 15cm Connecting Cable and connect it to the other port on the strip light. Mount the Strip Light underneath the roof inside the ground floor as shown below.
  • Page 49 20.) Take the other end of the 15cm Connecting Cable and connect it into the end port on an 8-Port Expansion Board. Connect up the AA Battery Pack, the 50cm Connecting Cable from the Ice Rink, and the two Bit Light cables from the lamp post to the 8-Port Expansion Board.
  • Page 50 Disconnect the Ice Rink Cable, the two bit light cables from the lamp post, as well as the AA Battery Pack to allow us to easily move the building around in order to install the remaining lights. 21.) We will now install a light to the lamp on the left side of the Fire Station. First disconnect the lamp along with the light grey 1×2 tile with stud behind it.
  • Page 51 Take a White 15cm Bit Light and thread the connector end of the cable through the bottom of the trans yellow brick. Thread it all the way through, then slightly bend the Bit Light so that it is directly facing down before pushing the it inside the trans yellow brick.
  • Page 52 Carefully reconnect the lamp back to the bracket piece but do NOT forcefully push the bracket piece all the way down otherwise it may snap the bit light cable, instead, leave the bracket piece about half a centimetre out. Use one of the LEGO tool pieces to push the Bit Light right up inside the trans yellow round brick.
  • Page 53 22.) Thread the connector side of the Bit Light all the way through the left hole of the building before reconnecting the lamp ensuring the cable is laid underneath the light grey tile.
  • Page 54 23.) Turn the building around to the back, then using your LEGO removal tool, create a gap in between floors as shown below: Bring the cable from the lamp down the side of the building and slip it through the gap in between the far right stud. Pull the cable down from the inside to eliminate any excess cable, then connect the Bit Light to the 8-port Expansion Board underneath.
  • Page 55 24.) Take a 30cm Connecting Cable and connect one end to the 8-Port Expansion Board. Bring the other end of the cable out and slip it in between the gaps (where the lamp bit light cable is), secure both cables in place by reconnecting the floors to close up the gap.
  • Page 56 25.) We will now install a light to the lamp on the right side of the building. First disconnect the lamp along with the light grey 1×2 tile with stud behind it. Disconnect the trans yellow round brick and black dish. Follow steps 21 – 22 to install another White 15cm Bit Light to this lamp section, then reconnect it to the building.
  • Page 58 26.) Use the LEGO Removal Tool to disconnect the roof off the right section of the building. Thread the Bit Light cable from the lamp up the tower through the corner gaps, then pull it all the way up to the top. Connect the cable to a new 6-Port Expansion Board.
  • Page 59 27.) Take the roof that we just disconnected and flip it over so we can access underneath. Take a White 15cm Bit Light and with the cable facing toward the left, place it inside the centre hole. Secure the Bit Light in place by connecting a provided Plate 1×2 over the cable.
  • Page 60 Leave this section for now as we will reconnect it at a later stage. 28.) We will now install some lights above the front windows. First, turn the set around to the front and disconnect the following tiles and sections as per below, then disconnect pieces from the large main section.
  • Page 61 29) Take a White 15cm Bit Light and with the bit light facing down and cable facing toward the inside of the building, place it over the edge of the left window in between white studs. Secure the Bit Light in place by reconnecting the two L shaped plates.
  • Page 62 30.) Turn the building around and from the inside of the set, lay the cable from the right around the stud above, then secure it down by reconnecting one of the red tiles.
  • Page 63 Repeat this step for the cable on the left. 31.) Use the LEGO Removal Tool to create a gap to the upper section of the left tower, then thread both cables from the windows through this gap.
  • Page 64 32.) Take a 15cm Connecting Cable and connect one end to the 6-port expansion board inside the left tower. Thread the other side of the cable through the gap we created in previous step. Pull the cable through from the other side then reconnect the wall to close up the gap and secure the cables (ensuring cables are laid in between studs).
  • Page 65 Connect both window light cables to the expansion board then take 2x Adhesive Squares and stick them to the back of the expansion board to mount it on the inside of the tower as shown below: 33.) Take the tower roof we installed a Bit Light to in step 27 and bring it over the tower.
  • Page 66 34) Take the main roof section and flip it over. Take the remaining White Strip Light and using it’s adhesive backing, stick it to the base of the remaining LEGO Plate 1×6. Take the 15cm Connecting Cable from the left tower and connect it to the left port on the strip light.
  • Page 67 Take the main roof section above the building and mount the Strip Light underneath in the below position. Eliminate excess cable by looping them underneath the strip light’s LEGO plate as shown below then securely reconnect the roof back on top of the building. Turn the Battery Pack ON to test that all lights we have installed to the building...
  • Page 68 are working OK. 35.) We can now reposition the Christmas Tree on the right side of the building. Take the 50cm Connecting Cable from this section and bring it around the back to connect to the 8-Port Expansion Board on the inside right side.
  • Page 69 Reposition the Ice Rink and Lamp Post sections on the left side of the building and then reconnect all cables to the 8-Port Expansion Board. Lastly, neaten up all cables, then tuck in the 8-Port Expansion Board inside the building behind the tool box. Neatly Place the AA Battery Pack behind and you’re done!
  • Page 70 This finally completes installation of the Light My Bricks Winter Village Fire Station Light Kit. We hope you enjoy and we thank you for purchasing this product.