Sharp LC-48CFE4042E Service Manual page 43

6.3.3 WB ADJUST
WhiteBalance Adjustment
This page only for current source White Balance Adjustment.
Different source may have different values. There are Warm,
Cool, Normal modes and save every seperate source. We can
change the R-GAIN, G-GAIN, B-GAIN, R-OFFSET, G-OFFSET,
B-OFFSET.
SYNC ALL: SYNC the white balance of the
current source to all other sources.
Picture 7 WB Adjust
6.3.4 OVERSCAN
This page can adjust overscan.
Note: Overscan should check with every timing.
Picture 8 Overscan
6.3.5 PQ ADVANCED
PQ Adjustment Page
Adjust luminance, Colors, peakings, NR and etc.
Picture 9 PQ Advanced
43