Tudor Games Kentucky Derby Run for the Roses Horse Racing Getting Started

Getting Started
Welcome to Run for the Roses Horse Racing!
Please read these assembly instructions and rules, they will
help guide you for the best horse racing experience!
Parts List
In addition to the racetrack, your game should include the
following parts:
A. 4 Horse figures in 4 colors
B. 16 Invisibase™ Horseshoes (extras are included)
C. 5 Tokens
D. Chance Bag
E. FieldDrive™ Motion Generator (Motor)
F. PlayAction™ Remote Control
If your game is missing any of these parts please contact
Tudor Games Customer Support for assistance.
Online Chat: www.TudorGames.com
Contact Email: support@tudorgames.com
Mount the Motor under the Racetrack
1. Turn game upside down;
2. Note the correct Motor location and orientation;
3. Peel adhesive backing from the Motor;
4. Lightly press the Motor into position;
5. Pick up game and press against Motor from both
sides of the game to secure to racetrack;
6. Plug Remote Control into Motor;
7. Install 2 AA batteries (not included) in the Remote
Control. Note the + and – markings and install as
indicated. Please refer to the Battery Safety Informa-
tion found within these instructions.
To Attach Invisibase Horseshoes
Slip 2 Invisibase Horseshoes onto the bottom of each horse
as shown. Note the "Direction of Travel" picture below right
-- blades should naturally angle slightly to the back.
For best results, you can fine tune your Horse's performance
in two ways:
1. Bend the four blades forward and backward
2. Angle the Horseshoes on the Horse's platform using
the examples below:
See our entire product line at www.TudorGames.com
Kentucky Derby Run for the Roses
®
A
D
Horse Racing
®
C
1 2 3 4 M
E
Mount Motor lengthwise as shown, centered on bottom
Direction of Travel
B
F
Page 1