Thank you for purchasing a quality MORGAN appliance. We trust that you will have a pleasant C O N T E N T S experience with your new product. To guarantee safety and best efficiency, please read this manual carefully and keep a copy for future reference.
20. Float Valve Seal Ring • This appliance is for household use only, and not intended for outdoor use. 21. Anti-blocking Cover DISMANTLING Press Down INSTALLING SPECIFICATIONS MODEL MPC-800 RATED VOLTAGE / FREQUENCY 220-240V~ 50/60Hz RATED WATTAGE 1250W CAPACITY 8.0L...
CONTROL PANEL OVERVIEW PRESET COOKING PROGRAMS A. TIME DISPLAy : displays remaining cooking time or remaining delayed start time. Function Default Pressure Adjust Pressure Pressure Setting Keeping Time Keeping Time B. TIME PRESET : To set a delayed starting time. (Minutes) (Minutes) C.
BEFORE FIRST USE OPERATING INSTRUCTIONS 1. Read this entire manual carefully, including all warnings. 1. Turn the Pressure Limit Valve to “SEAL” position. Ensure that the Float Valve is in the down position. 2. Remove all stickers, tape, excess packaging, etc. from the appliance. 2.
Page 6
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS WARM MODE STEW MODE • • The “WARM” mode is used to keep cooked food warm for extended periods of time. The Stew function is designed to stews meat or ribs under pressure. The default time is 35 minutes, •...
OPERATING INSTRUCTIONS CARE AND MAINTENANCE 5. Press the “–” or “+“ buttons to set the desired time of delay (up to 24 hours in the future). Time can Regular care and maintenance is essential in ensuring the appliance’s safe and reliable be delayed in 30-minute increments up to 10 hours, and 1-hour increments from 10 hours to 24 performance.
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSES SOLUTION Lid is difficult to close Sealing ring not properly Reposition the sealing ring correctly. installed. Floating valve stuck in upwards Push down the floating valve so that it position. does not block the locking pin. Difficult to open Pressure trapped inside the Use the steam release handle to reduce...
Need help?
Do you have a question about the MPC-800 and is the answer not in the manual?
Questions and answers