Page 2
This user manual helps you to get Q-Door installed. The installation can be performed using PC, Tablet or Smart Phone. In order to use the Q-Door with HomeManager you need to have a NorthQ gateway (Q-Stick, Q-Gate or Q-Gate Pro).
Page 4
Q-Stick Setup Q-Door Installation Q-Door is an innovative door sensor and when in Armed Mode settings, it sends an an alert whenever a door or a window is opened. Additionally, it detects changes changes in humidity, temperature and light.
Page 5
Q-Door Installation Go to HomeManager menu Select Install...
Page 7
Q-Door Installation Insert the batteries Click on start pairing Press the button 3 times...
Page 8
Q-Stick Setup Q-Door Installation Check if device is paired Click on Next...
Page 9
Q-Door Installation Insert Sensor Name Assign Sensor to a Room Click on Next...
Page 10
Q-Door Installation Mount the sensor in the room Use the adhevise tape to mount the sensor on the door/ window frame. The magnet has to be mounted at a maximum distance of 1.9 cm from the sensor. Click on Finish...
Page 11
A New Way of Living NorthQ ApS Strandvejen 157 | 2900 Hellerup | Denmark email: support@northq.com | website: www.northq.com...