Advertisement
LIGHTED HOLIDAY GIRAFFE
ITEM NUMBER: TY-A-200L/4W-123(72)
A. Head
B. Neck
Qty：1pc
Qty：1pc
D. Legs
E. Tail
Qty：4pcs
Qty：1pc
G. Ground Stakes
H. Plastic Ties
Qty：4pcs
C. Body-2 halves
F. Bow
Qty：1pc
ASSEMBLY INSTRUCTIONS
FIG.1
STEPS:
(1)Carefully remove all of the parts from the box and place on a flat surface. Check the Parts
List to make sure all of the parts are included. If there are any plastic covers to protect the end
of metal rod tips, remove the covers before assembly.
(2) Align two Halves of Body (Part# C) with each other and insert the rods on one half into the
holes on the other half then fasten them together with the Plastic Ties (Part# H); (See FIG.1).
(3) Insert two posts of each Leg (Part# D) into the matching holes in the body; Insert the rod of
Tail (Part #E) into the rear of the Body.(See FIG.2)
(4) Insert the rod of the Neck (Part #B) into the hole tops of the Body; and insert the rod of the
Head (Part #A) into the holes of the neck then fasten them togther with the Plastic Ties(Part
#H).Insert the wires of the Bow(Part# F) through the holes of the body, then twist the wires
together .(See FIG.3)
(5) Secure the Sculpture to the ground with the Ground Stakes (Part #G); (See FIG.3).
(6) Plug in.
FIG.2
FIG.3
Advertisement
