Advertisement
Quick Links
Wiring Diagram
Plugs into back of monitor
Wiring Notes:
• The NG60 has 4 camera inputs but is designed for one camera to be triggered when
reverse gear is engaged.
• Whichever camera you want to trigger when reverse gear is engaged, please make
sure you plug it into the reverse camera input.
• You can still access Cam 1, 2 & 3 whilst in reverse, please see page 4 for instructions
on how to do this.
• If you don't wish for a camera to activate whilst in reverse, then simply plug your
camera into either Cam 1, 2 or 3 as you can view these cameras whilst driving.
• Cam 1, 2 & 3 can be accessed at any time whilst driving forward, please see
page 5 for instructions on how to do this.
• The NG60 is 12-32Volt and is built into the monitor.
• If you are only wiring up one camera to engage when in reverse please run the
Acc+ (red) along with the reverse trigger wire (green) directly to your reverse lights.
This way the monitor will power down when drive is activated. If you add an
additional camera(s) at a later stage, please run the ACC+(red) to accessories
power so you can access the additional camera(s) whilst driving.
If you have any questions in regards to the wiring of this unit, please contact
Polaris on 1300 555 514
3
Reverse Camera
Cam 1
Cam 2
Cam 3
Reverse (Green)
GND (Black)
Acc+ (Red)
Advertisement
Related Manuals for Polaris NG60H
Summary of Contents for Polaris NG60H
- Page 1 ACC+(red) to accessories power so you can access the additional camera(s) whilst driving. If you have any questions in regards to the wiring of this unit, please contact Polaris on 1300 555 514...
- Page 2 NG60—reverse trigger only wiring diagram Plug camera into reverse camera input 7 metre extension cable Miniature Camera 12V+ (ACC) Twist together and wire to reverse power Reverse trigger GND - Ideal setup if you only want a single camera to come on when reverse gear is engaged.
- Page 3 NG60WR Wiring Diagram Plug camera into Cam 1 7 metre extension cable White Round Camera 12V+ (ACC) Reverse trigger GND - If you wish to view the camera at any time, please plug the camera into camera 1 If you wish for the camera to only come on when you engage reverse, plug the camera into the reverse camera input and wire both the 12V+ (ACC) and the reverse trigger to reverse power...
- Page 4 NG-CV05 Wiring Diagram 2M CARSIDE WOZA 10M CARAVAN WOZA 7M EXT. CABLE CABLE 2.5M COIL CABLE ACC Power Reverse Trigger Ground 1. It’s preferred that this camera stays on all the time, to do so plug the 7m extension into camera 1 plug, and have the wiring as normal. 2.
- Page 5 NG-CV10 Wiring Diagram 2M CARSIDE WOZA 10M CARAVAN WOZA 7M EXT. CABLE CABLE 2.5M COIL CABLE ACC Power Reverse Trigger 7M MINI CAM EXT. Ground 1. The mini camera is designed to be at the back of the vehicle, and is generally plugged into the reverse input so that it comes on in reverse.
- Page 6 NG-60DC Wiring Diagram 2x 7m Ext. ACC Power Reverse Trigger Ground 1. Make sure the camera you want to come on in reverse, is plugged into the reverse camera plug. (Either the 120° or 40°, generally the 120°) 2. If you don’t want a triggering camera, just plug both cameras into cam1 and cam 2.
- Page 7 Dual Camera NG-CV05DC Wiring Diagram If you want your 120 degree camera to engage when in reverse, plug into the reverse camera input. Plug your 40 degree camera into Cam 1 so you can view at any time Dual WOZA Kit 7 metre ext cables 12V+ (ACC) Reverse trigger...
- Page 8 Dual Camera NG-CV60DC Wiring Diagram Plug your miniature camera (mounts on the back of tow vehicle) into the reverse camera input Plug your dual camera into camera 1 and camera 2 Miniature Camera 12V+ (ACC) Reverse trigger Dual WOZA Kit GND - Generally the tow vehicle camera plugs into the reverse camera input however if you want to bypass the reverse trigger, simply...
- Page 9 NG60H Wiring Diagram Plug camera into Cam 1 10 metre extension cable Heavy Duty Camera 12V+ (ACC) Reverse trigger GND - If you wish to view the camera at any time, please plug the camera into camera 1 If you wish for the camera to only come on when you engage...