Installing The Safety Flag - Kettler Quadriga Trailer Instruction Manual

GB INSTALLING THE WHEEL GUARD
To mount the wheel guard, you will need the following tools (not included in the scope of
delivery):
• a screwdriver
Your trailer is equipped with a wheel guard for added safety. The wheel guard helps distract
the tyre from obstacles that can stop the trailer and cause an accident.
Before fitting the wheel guard,
remove the dirt mat and remove
the lower seat cover and the
storage compartment under
the seat from the frame (Fig. 1-2).
There are 2 holes in the front of the side frame, directly in front of the wheel (Fig. 3).
Insert the wheel guard into the holes (Fig. 4) using the appropriate connectors.
Screw two screws each from the inside (included in delivery) for fastening (Fig. 5-7).
4.
3.
5.
After installation, carefully reattach all Velcro fasteners.
10
Instruction Manual | Quadriga Trailer
1. 2.
8.
6.
7.

INSTALLING THE SAFETY FLAG

WARNING! ACCIDENT DUE TO DESTROYED FLAG
This flag is meant for use only with the trailer. This flag is not a toy. By a
destroyed flag the trailer can be overlooked by the traffic. Failure to com-
ply with this warning could result in serious injury.
Do not let your child play with the flag.
Assemble the flag and insert the end into the small button hole on the top
of the handlebar (Abb. 1).
1. 2.
Instruction Manual | Quadriga Trailer
11