Premium Poly Patios Luxcraft Crestville CV-4CPG Manual

4' Classic Poly Glider

(A) - Seat Assembly

(B) - Back Assembly

(C) - Glider Base
(D) - Glider Base

(E) - Bearing Supports

(F) -Head Board
(G) - Armrest Assembly
(H) - Armrest Assembly
(I) - Crosspiece Support
(J) - Lintels
(K) - Front & Back Crosspieces

Hardware

2 - 5/16" x 4" Bolt
2 - 5/16" x 3" Bolt
6 - 5/16" x 2 1/2" Bolt
4 - Large Nut (3/8")
10 - Small Nut (5/16")
28 - Washer
8 - 2 1/2" Screws
44 - 2" Screws
8 - 1/2" Screws
1.
Attach (K) Front Crosspiece to Glider Base Sides
using fourteen 2" Screws.
**Be sure to match all letters and/or numbers**
3.
Attach (I) Crosspiece Support between Crosspieces
and attach using four 2" Screws.
right side
left side
right side
left side
C.
**Be sure to use all letters and/or numbers**
B.
D.
E.
2.
Attach (K) Back Crosspiece to Glider Base Sides
using fourteen 2" Screws.
**Be sure to match all letters and/or numbers**
2" Screws
F.
A.
G.
I.
2" Screws
H.
J.
K.