Download Print this page

J.W. Speaker 7251 XD Instruction Sheet

Led work light

Advertisement

Quick Links

Approval Logos
Installation Guidelines
BEFORE INSTALLATION:
1. Read all safety notes and mounting guidelines before installing
the product. Verify that all parts listed under "In the Box" are
present and complete.
2. Inspect the product for damage. DO NOT install the product if
there is any damage. Contact the distributor where you purchased
it to initiate a warranty claim if there is damage.
3. Verify that all power supply and/or charging systems comply to
the specified voltage limits for the light .
IMPORTANT NOTE:
The warranty on this product does not cover claims resulting from:
• Abuse, neglect and/or accidents
• Modifications and/or alterations
• Improper installation and/or use
• Chemicals and/or cleaners
• Voltage transients and/or spikes
Please refer to the warranty statement for full details.
Complete warranty information is available at www.jwspeaker.com/warranty.
J.W. Speaker Corporation • Germantown, WI U.S.A. • www.jwspeaker.com • speaker@jwspeaker.com • 262.251.6660
Rev: 05/27/2015
LED Work Light Instruction Sheet
INSTRUCTION INFORMATION
Estimated Time
Tools Needed
In the Box
Wire Functions
Input Voltage
Operating Voltage
Hardware Required
Product Specifications
For a complete list of product
specifications, scan the QR code to
the right, or visit www.jwspeaker.com
and search "Model 7251 XD."
INSTALLATION:
1. Turn off the equipment and disconnect the power supply.
2. Ensure that the light is mounted to/on a FLAT, SOLID surface of
the same (or larger) size as the bracket or light. This will prevent
warping or distortion that can cause cracking or damage to the light
and/or bracket.
3. Carefully connect the wires using the "Wire Functions" and
"Voltage" information above to power the light.
4. All connections should be adequately protected against
moisture. Shrink tubing is recommended.
5. Lay and secure wiring/connectors to avoid any pulling or
abrasion that may damage the wires.
6. Frequently check the light to make sure that it is working
properly and is securely attached.
Model 7251 XD
15 minutes
Screwdriver
(x1) Model 7251 XD
Black = Ground
Red = Power
12-24V DC
10-32V DC
(x4) #8 Screws
(Not Included; See reverse for diagram)
CONTINUED ON NEXT PAGE
6544110a

Advertisement

loading

Summary of Contents for J.W. Speaker 7251 XD

  • Page 1 • Voltage transients and/or spikes Please refer to the warranty statement for full details. CONTINUED ON NEXT PAGE Complete warranty information is available at www.jwspeaker.com/warranty. J.W. Speaker Corporation • Germantown, WI U.S.A. • www.jwspeaker.com • speaker@jwspeaker.com • 262.251.6660 Rev: 05/27/2015 6544110a...