Worx MAKERX WX742 Safety And Operating Manual Original Instructions
20v cordless air brush
Hide thumbs
Also See for MAKERX WX742:
- Manual (181 pages) ,
- User manual ,
- Safety and operating manual (17 pages)
Related Manuals for Worx MAKERX WX742
Summary of Contents for Worx MAKERX WX742
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS WX742 20V Cordless Air Brush WX742.X...
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Page 4 contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6. SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
- Page 5 When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other. n) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Page 6 Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Li-Ion battery. This product has been marked with a symbol relating to ‘separate collection’ for all battery packs and battery pack. It will Li-I on then be recycled or dismantled in order to reduce the impact on the environment.
-
Page 8: Component List
COMPONENT LIST FEEDING CUP FEEDING CUP COVER DUAL FUNCTION TRIGGER TAIL ADJUST SCREW POWER CORD CONNECTION COMPRESSOR NOZZLE Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Type WX742 WX742.X (742 - designation of machinery, representative of air brush) WX742 WX742.X * Rated voltage... -
Page 9: Noise Information
NOISE INFORMATION A weighted sound pressure = 71.9 dB(A) A weighted sound power = 82.9 dB(A) & K 3.0 dB(A) Wear ear protection. VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value a = 1.804 m/s²... -
Page 12: Operation
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended use This tool is intended for painting. ASSEMBLY 1. Plug the spray gun into the compressor. Make sure the spray gun is fully inserted. (See Fig. A1) After that, turn clockwise to adjust the spray gun to your desired position (See Fig. -
Page 13: Environmental Protection
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool. - Page 14 DECLARATION OF CONFORMITY Positec Germany GmbH Grüner Weg 10, 50825 Cologne, Germany On behalf of Positec declare that the product Description Battery operated air brush Type WX742 WX742.X (742 - designation of machinery, representative of air brush) Function spraying nonflammable material Complies with the following Directives: 2006/42/EC, 2011/65/EU&(EU)2015/863, 2014/30/EU Standards conform to...
-
Page 15: Declaration Of Conformity
DECLARATION OF CONFORMITY Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product Description Battery operated air brush Type WX742 WX742.X (742 - designation of machinery, representative of air brush) Function spraying nonflammable material Complies with the following Directives: Supply of Machinery (Safety) Regulations 2008... - Page 16 After-sales Service and Application At www.worx.com you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: 0345 202 9679 E-Mail: customerservices@worxtools.com www.worx.com Copyright © 2020, Positec. All Rights Reserved..
Need help?
Do you have a question about the MAKERX WX742 and is the answer not in the manual?
Questions and answers