Table of Contents
Advertisement
Important:
Always report your location to the 911 operator
when placing an emergency call.
designated emergency call takers, known as
Public Safety Answering Points (PSAPs) may not
be equipped to receive GPS location information
from your device.
In-Call Options
Once you initiate a call, you
will see six onscreen options.
Tap an option to select it.
touch and hold to
Add call
initiate a 3-way call
(page 142).
to toggle between
Swap
two active calls.
to end the current call.
End
to toggle the
Dialpad/Hide
appearance of the
onscreen dialpad.
Bluetooth
connected Bluetooth headset (
Some
speaker (
When the call is routed to a Bluetooth headset,
the current call area shows the
icon (
Note:
When Bluetooth or the Bluetooth headset is
turned off, the call is routed through either the
earpiece or speaker and shows (
Mute
Tap again to unmute the microphone.
Note:
Speaker
speaker (
to route the device's audio through a
Off
). (See "2J. Bluetooth" on page 127.)
).
The Headset button is activated to show the current call
is routed to the connected Bluetooth headset.
To route the current call back to the device,
tap
Headset
to temporarily use the device. Tap
it again to route the call back to the connected
Bluetooth headset.
to mute the microphone during an active call.
If Mute is activated, the speaker mode is deactivated.
to route the device's audio through the
On
) or through the earpiece (
2B. Making and Answering Calls
) or through the
On
call
Bluetooth
).
Off
).
57
Advertisement
Table of Contents
