Sending Contacts Via Bluetooth - Samsung Infuse SGH-i997 User Manual

Note: Pairing between two Bluetooth devices is a one-time process. Once a
pairing has been created, the devices will continue to recognize their
partnership and exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection between
the device and your phone, but retains the knowledge of the
pairing. At a later point when you wish to reconnect the device,
there is no need to setup the connection information again.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, tap the previously paired
2.
device (from the bottom of the page).
Tap OK to confirm disconnection.
3.
– or –
From the Bluetooth settings page, touch and hold the
name of the previously paired device, and select
Disconnect.
Note: Disconnections are manually done but often occur automatically if the
paired device goes out of range of your phone or it is powered off.
To delete a paired device (unpair):
Deleting a device from your list removes its "connection record"
and upon reconnection would require that you re-enter all the
previous pairing information.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, touch and hold the
2.
name of the previously paired device (from the bottom of
the page). This opens the connected device's menu
options.
Tap Unpair to delete the paired device.
3.

Sending Contacts via Bluetooth

Depending on your paired devices' settings and capabilities, you
may be able to send pictures, Contact information, or other items
using a Bluetooth connection.
Note: Prior to using this feature, Bluetooth must first be enabled, and the
recipient's device must be visible.
Verify your Bluetooth is active.
1.
From the main Home screen, tap Contacts
2.
3. Press Import/Export
.
Send namecard via.
Connections 136