Samsung Galaxy Tab SGH-T849 User Manual page 111

Network Notification
By default, when Wi-Fi is on, you receive notifications in the
Status bar anytime your tablet detects an available Wi-Fi
network. You can deactivate this feature if you do not want to
receive notifications.
From the Home screen, touch
1.
and network Wi-Fi settings.
Touch Network notification. A check mark displayed next to
2.
the feature indicates Network notification
is active.
Touch Network notification again to remove the check
3.
mark and deactivate this feature.
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi tablets, routers, access points,
computers, adapters, and other electronic devices.
Settings Wireless
Mobile AP
Mobile AP settings
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
From the Home screen, touch
1.
and network Wi-Fi settings.
Touch WPS button connection.
2.
Press the WPS button on your Wi-Fi access point within 2
3.
minutes.
You can use your tablet as an Internet AP (Access Point) using
Mobile AP. This allows other devices (maximum of 5) to connect
to your tablet using a Wi-Fi connection. The Internet is available
on connected devices to share your 3G network.
Follow these steps to set up a Mobile AP connection:
From the Home screen, touch
1.
and network Mobile AP.
Tap Mobile AP. A checkmark indicates activation.
2.
Tap Yes to deactivate the Mobile AP connection.
3.
Settings Wireless
Settings Wireless
Changing Your Settings 107