Download Print this page

Toshiba TCB-DP31DE Installation Manual page 7

For concealed duct high static pressure type

Advertisement

5
Hose Connecting
CAUTION
Be careful not to damage the Drain pump kit hose during handling before extending it because it
passes under the unit.
REQUIREMENT
Be sure to fix the center of the hose
a drain trap. (Water leakage may occur without this drain trap.)
• Connect the elbow
adhesive for vinyl chloride to connect pipes.
• Install the elbow
20 degrees downward by tightening the socket
to install a drain trap to the hose.
• Connect the socket
hose with the hose bands
• Insulate the vinyl chloride joint and the hose at the Drain pump unit connection portion with the heat
insulation for pipe
Ensure heat insulation by taping at the insulator joint areas.
• Secure the fixture plate
(Be sure to install this fixture plate
Outlet drain
pipe
Drain pump unit
Heat insulation
for pipe
to the air conditioner cabinet with the fixture band
, drain pipe
, and the socket
to the Drain pump unit inlet pipe with the hose
. Insert the hose
and heat insulation for elbow
to the attachment plate
as this is for ensuring an angle of 20 degrees.)
Taping
Drain hose with heat
insulation
<Enlarged view of joint>
to the drain port of the air conditioner. Use
into the joint by approx. 25 mm.
.
with the tapping screw
Electric
parts box
Fixture band
Socket
Drain pipe
Elbow
4
to install
to torque of 600 to 1000 kg.cmf
, and tighten both ends of the
.
Tapping screw
Fixture plate
Heat insulation
for elbow
Air conditioner
Taping
Install drain hose trap

Advertisement

loading