Page 1
Column Number Maximum Load 88LBS (including 22LBS for schoolbag hooks) Max Speed 06"/s Input Voltage 110-240V Lowest Position 21.7" Highest Position 35.0" length 39.4" Desktop Size width 19.7" Continuous operation for 2 mins at most after Duty Cyde pause for 18 mins Applicable Temperature 0~40℃...
Page 3
Note Install the feet as shown in the figure, the long side of the feet facing inward installed in the lifting column with the motor. The right and left feet are facing the same direction.
Page 4
Note When installing the support plate, the long side of the support plate and the long side of the feet must be in the same direction...
Page 5
Install desktop, hand switch and adapter bracket First buckle the adapter bracket (7) into the desk frame (2) and then screw the desk frame (2) on the desktop (1) with screws (C), fix the hand-switch (13) with screws (14) on the desk top (1) and tighten with a pistol drill.
Page 6
Push Push First snap in the four caps(8) into the beam of the desk frame (2) and then into the protective cover (3)
Page 7
Connect the adapter cable to the DC Port Connect the Motor cable to the M1 Port...
Adjust the desk upwards Adjust the desk downwards Height Adjustable Function Reset Function 1.Built-in sensor, the detection is more sensitive, 1 gear, when the desk encounters another object during the movement, the anti-collision function will be triggered, then the desk will instantly stops and reverses to avoid damage.
Need help?
Do you have a question about the AYTHDSK40 and is the answer not in the manual?
Questions and answers