Setup And Storage; Base Pole Assembly; Connect The Chipping Target To The Tension-Tite™ Arm Poles; Storing Your Quickster Chipping Net - SKLZ QUICKSTER Instruction Manual

STEP 1

BASE POLE ASSEMBLY

–
1 Insert each of the Base Poles into the holes of the
corresponding corner joints.
NOTE: Ensure are poles are fully inserted. Failure to do
so may result in damage to the Chipping Net.
sV1
SKLZ
.COM
ChippingNet_Instru_2-sided_8x11_sV1.indd 2

SETUP AND STORAGE

CORNER
POCKET
BACK
VIEW
BASE POLES
TENSION-TITE ARM POLES
STEP 2
CONNECT THE CHIPPING TARGET TO THE TENSION-TITE™ ARM POLES
NOTE: Ensure all poles are fully inserted. Failure to do so may result in damage to the Chipping Net.
–
1 Slide each of the Tension-Tite™ Arm Poles into the corresponding top corner pocket on the
Chipping Target.
STEP 3

STORING YOUR QUICKSTER CHIPPING NET

Remove the Tension-Tite™ Arm Poles from the pockets on the Chipping Target.
WARNING: Chipping Net is under tension when assembled. Please take the utmost care when
releasing the tension during disassembly. Failure to do so may result in injury.
Disconnect the Base Poles from the corner joints and fold the frame so all of the poles lay parallel.
Roll up the Frame into the Chipping Target, and place into the Carry Bag.
AERIAL VIEW
CHIPPING TARGET
(back side laying down)
VISIT SKLZ.COM FOR
INSTRUCTIONAL VIDEO AND CONTENT
Training Videos & Articles: SKLZ.com
facebook.com/SKLZgolf
twitter.com/SKLZ
1/17/14 3:40 PM