Close Comfort Box Tent Setup Instructions

Box Tent Setup Instructions
1
5
Open up the side door panels with the zippers provided. Use the three
ties on each side to adjust the width of the tent to be equal to the width
of the mattress. Untie them for the widest kind of bed.
8
12
2
6
9
13
3
7
10
14
Sometimes, one of the steel hoops that frame the
4
edges of the tent side panels can become twisted,
so the tent appears deformed like this.
If this happens, try collapsing the
tent and try again.
If the tent is still distorted, grasp
the frame with both hands and
bend the frame a little more as
shown in this diagram, and then
slide your hands alternately around the frame, bending it a
little each time. The frame will suddenly snap into shape.
11
From inside the tent, the air conditioner should
15 now look like this.
Make sure the air
flow from the top
edge of the curved
cold air deflector is
not obstructed by
the adapter fabric.
Place a small dry
sponge or piece of
foam plastic on top
of the deflector if
necessary.