Download Print this page

AMC IT-2000 Technical Manual

Telephone gsm interface

Advertisement

Quick Links

TELEPHONE GSM INTERFACE
DESCRIPTION
The IT-2000 GSM interface simulates a traditional telephone line (PSTN) using a GSM system module.
It can be used as telephone backup system when a PSTN line is out of order or is not available: in these
conditions, or if the interface is properly configured, a call from an external unit is forwarded through the
GSM network. Besides, in the previous conditions, an incoming call from GSM network, generates a ring for
the external unit.
The system is completely transparent to SIA FSK and CONTACT ID protocols signals; it also provides sy-
stem status and lifetest O.C. outputs .
Using SMS commands IT-2000 can be remotely configured and can generate system informations.
AUTOMATIC SMS MESSAGES
IT-2000 handles incoming and outgoing SMS messages.
Incoming messages are used to configure the system.
Outgoing messages can be answers to commands or the following event-generated (if enabled) messa-
ges:
ID
Default Text
1
1
LIFE TEST
2
LOW BATTERY
3
GSM NO LINE
4
PSTN FAILURE
5
"Sender
ID":received
text
2
6
GSM:OK LEV :3
PSTN:FAIL
BATT:OK
1) The text of the first 4 messages can be changed
2) The echo function returns the message received by the system preceeded by the sender id.
This function also allows to monitor improper access attempts
A SMS message is sent if the relevant event occurs and if it has been previously associated at least to a
telephone number (8 telephone numbers may be stored in the system): by default, all messages are asso-
ciated to the first telephone number of the address book.
www.amcelettronica.com
EN 50136-1-1 EN 50136-2-1+A1
IT-2000
Description
Programmable life test: sent periodically according to the configu-
ration
Battery fail (the battery status is tested every 15 minutes)
GSM fail: this message is sent as soon as the GSM network becomes
available after a programmable out of service time
PSTN line FAIL: if the PSTN line is not available this message must
be disabled
SMS echo function: this function forwards each incoming not reco-
gnized SMS (e.g.: SIM card expiry, credit exhaustion, etc.)
After detecting a ring from the GSM network, the system checks if the
calling telephone number belongs to the adrress book and, if yes, it
answers with a message containing the system status.
This message doesn't need to be associated to a specific telephone
number of the address book.
COMPLIANT
ATS 2
TECHNICAL MANUAL
(ENGLISH)
IT-2000

Advertisement

loading

Summary of Contents for AMC IT-2000

  • Page 1 (ENGLISH) DESCRIPTION The IT-2000 GSM interface simulates a traditional telephone line (PSTN) using a GSM system module. It can be used as telephone backup system when a PSTN line is out of order or is not available: in these conditions, or if the interface is properly configured, a call from an external unit is forwarded through the GSM network.
  • Page 2 ATTENTION: introduce a SIM card with no data stored in its memory (no tele- phone numbers in address book and no text messages). The SIM card insertion and extraction operations must be done with the inter- face completely devoid of power. www.amcelettronica.com IT-2000...
  • Page 3: Led Function

    SIM card locked, low battery level). If the problem is related to GSM network the RED and SYSTEM the YELLOW LEDs will blink simultaneously. NOTE: the battery status can be tested only when the voltage on the terminals “SUPPLY” is STATUS absent. www.amcelettronica.com IT-2000...
  • Page 4: Reset (Default) Button

    USE OF THE INTERFACE WITH A TELEPHONE EXCHANGE SYSTEM When the IT-2000 is connected to a telephone exchange, the number generated by the alarm system may contain a prefix that must be skipped when forwarded to the GSM network (eg: the 0 065487954 number must exit as 065487954).
  • Page 5 (ON|OFF) operating on the GSW network skip=off no digit will be skipped pulse=off the unit generates a continuous dial PULSE This command configures the output dial tone (ON=pulsed OFF=continuous) tone (ON/OFF) www.amcelettronica.com IT-2000...
  • Page 6 PWD:000000 smstext.1=”my life PWD:OK Because of the “ markers, the space test” SMSTEXT.1:OK characters have been accepted PWD:000000 smstel.1=0 PWD:OK Clear all association among address smstel.2=0 smstel.3=0 SMSTEL.1:OK book and SMS messages smstel.4=0 smstel.5=0 SMSTEL.2:OK SMSTEL.3:OK SMSTEL.4:OK SMSTEL.5:OK www.amcelettronica.com IT-2000...
  • Page 7: Technical Specifications

    Emulated line tone 440 Hz Emulated line voltage 33Vdc Housing Plate RAL 9002 Size 200 x 260 x 45 mm Temperature range rom +5°C to +40°C Meets the requirements: Conforme ai requisiti: EN 50136-1-1 EN 50136-2-1+A1 ATS 2 www.amcelettronica.com IT-2000...
  • Page 8 A properly installed and maintained alarm system can only reduce the risk that this happens. Any GSM speech dialler or communicator, not connected to the PSTN standard telephone line, does not ensure proper communication in case of problems or limitations due to the GSM network. www.amcelettronica.com IT-2000...