Table of Contents
Advertisement
ABOUT LEAD FREE SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF printing on the PCB.
(Please refer to figures.)
Caution:
Pb free solder has a higher melting point than standard solder;
Typically the melting point is 86
Please use a soldering iron with temperature control and adjust it to 650
In case of using high temperature soldering iron, please be careful not to heat too long.
Pb free solder will tend to splash when heated too high (about 1100
Pb free solder will tend to splash when heated too high (about 1100
All products with the printed circuit board with PbF printing must be serviced with lead free solder.
When soldering or unsoldering, completely remove all of the solder from the pins or solder area,
and be sure to heat the soldering points with the lead free solder until it melts sufficiently.
Recommendations
Recommended lead free solder composition is Sn-3.0Ag-0.5Cu.
o
o
o
o
F~104
F(30
C~40
C) higher.
o
o
F
20
F (350
±
o
o
o
o
F/ 600
F/ 600
C).
C).
A1-5
A1-5
o
o
C ±10
C).
Advertisement
Table of Contents
