Advertisement
INSTRUCTION SHEET
Surface Mounted Bed Rail
Brackets
QUESTION...
1•847•780•6120
These brackets are assembled to the inside
of the bed rails, making them invisible when
viewing the bed from the outside.
CAUTION
These brackets are not recommended to
be used on bunk beds.
SPECIFICATIONS
3
5
8 "
8 "
Female Brackets
NOTE: Assemble these brackets to 6" or
wider bed rails. DO NOT assemble to bed
rails smaller than 5".
PACKAGING CONTENTS
4 - Sets of Brackets
2 - #1 Male Brackets to be used with
2 - Female Brackets
2 - #2 Male Brackets to be used with
2 - Female Brackets
NOTE: The male brackets are
stamped with a #1 or a #2.
16 - Flat Head Wood Screws 5/8" #8
16 - Flat Head Wood Screws 1-1/4" #8
7
8 "
1
2 "
1
1
2 "
#1 Male Brackets
MODEL NO. 71425
7
8 "
1
2 "
1
1
2 "
#2 Male Brackets
Advertisement
Table of Contents
Summary of Contents for PowerTec 71425
- Page 1 INSTRUCTION SHEET MODEL NO. 71425 NOTE: Assemble these brackets to 6" or wider bed rails. DO NOT assemble to bed Surface Mounted Bed Rail rails smaller than 5". Brackets PACKAGING CONTENTS 4 - Sets of Brackets QUESTION... 2 - #1 Male Brackets to be used with 2 - Female Brackets 1•847•780•6120...
- Page 2 ASSEMBLY Attach the male bracket to the bed rail end with the 5/8" #8 wood screws. Each rail requires a #1 and a #2 set Locate the position for the female of brackets. bracket on the bed post. Hold the The bed rail MUST be wider than 5".
Need help?
Do you have a question about the 71425 and is the answer not in the manual?
Questions and answers