Ortus Button-R Operation Manual

Keyfob

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Attention! Reliability and life of the product are provided not only by the quality of product itself,

but also by the compliance with operating modes and conditions, therefore, this document

requirements is mandatory

ORTUS Group

Button-R

Keyfob

Button-R

Operation manual

Product Compatibility Table

Compatible radio receiver

Configuration Software

Central Monitoring Station

Version en_2

Version

Lun-R

Version

Configurator 11

Version

Orlan

Table of Contents

Need help?

Do you have a question about the Button-R and is the answer not in the manual?

Questions and answers

Summary of Contents for Ortus Button-R

Page 1 Attention! Reliability and life of the product are provided not only by the quality of product itself, but also by the compliance with operating modes and conditions, therefore, this document requirements is mandatory Keyfob Button-R Operation manual Product Compatibility Table Version...
Page 2 2. Safety Precautions................................. 3 3. Technical specifications...............................3 4. How to use..................................4 4.1. Modes Indication..............................4 4.2. Binding..................................5 4.3. Wireless signal strength............................. 5 5. Maintenance..................................5 6. Operating conditions..............................5 7. Storage....................................6 8. Transportation................................6 9. Disposal.................................... 6 Button-R Version en_2...
Page 3 1. Purpose The Button-R remote keyfob (hereinafter referred to as the “keyfob”) is designed to transmit arming/disarming commands as well as the panic button to the Lun-R receiver that is connected to the Lun control panel (more about for compatibility, see the documentation of the relevant control panel).
Page 4  Binding – blinking green while waiting for a signal from the Lun-R receiver to register in the control panel memory;  Bound – when the binding is completed successfully – turning on red for 2…3 seconds. Button-R Version en_2...
Page 5 2. Keyfob shall be used at the temperature of –20°С to +55°С and relative humidity of 5% to 85%. 3. If the transportation conditions differ from the operating conditions, then the keyfob must be kept in the operating conditions for 2…6 hours before switching on. Button-R Version en_2...
Page 6 3. Transportation temperature shall be of –50°C to +50°C at the relative humidity of 5% up to 98%. 9. Disposal Keyfob disposal shall be carried out according to electronic household appliance disposal rules established by the legislation of the State, where the product is operated. Button-R Version en_2...
Page 7 Manufacturer: ORTUS Group 1 East Liberty, 6th Floor Reno, NV 89501, USA Tel.:+1 650 240 27 62 mail: info@ortus.io http://www.ortus.io Button-R Version en_2...