Table of Contents
Advertisement
Quick Links
Attention! Reliability and life of the product are provided not only by the quality of product itself,
but also by the compliance with operating modes and conditions, therefore, this document require-
ments is mandatory
ORTUS Group
Smoke-R
Smoke Detector
Smoke-R
Operation manual
Product Compatibility Table
Compatible radio receiver
Configuration Software
Central Monitoring Station
Version en_2
Version
Lun-R
Version
Configurator 11
Version
Orlan
1
Advertisement
Table of Contents
Summary of Contents for Ortus Smoke-R
- Page 1 Attention! Reliability and life of the product are provided not only by the quality of product itself, but also by the compliance with operating modes and conditions, therefore, this document require- ments is mandatory Smoke Detector Smoke-R Operation manual Product Compatibility Table Version...
- Page 2 4. How to use..................................4 4.1. Modes Indication..............................4 4.2. Binding..................................5 4.3. Operability check..............................5 4.4. Wireless signal strength............................. 6 4.5. Installing................................. 6 5. Maintenance..................................6 6. Operating conditions..............................6 7. Storage....................................7 8. Transportation................................7 9. Disposal.................................... 7 Smoke-R Version en_2...
- Page 3 1. Purpose The Smoke-R detector (hereinafter referred to as the “detector”) is designed to detect a smoke inside of protected objects and transmit this events to the Lun-R receiver that is connected to the Lun control panel (more about for compatibility, see the documentation of the relevant control panel).
- Page 4 4.1. Modes Indication The detector modes displays by multicolored LED: Norm – light off; Alarm – flashing red once every 1 second; Smoke-R Version en_2...
- Page 5 To return to the “normal” state, remove the wire from the detector housing and enter a Reset command by a control panel. Then the detector indicator should turn off. A similar check of the detector's operability should be executed every year. Smoke-R Version en_2...
- Page 6 2. Detector shall be used at the temperature of –20°С to +55°С and relative humidity of 5% to 85%. 3. If the transportation conditions differ from the operating conditions, then the detector must be kept in the operating conditions for 2…6 hours before switching on. Smoke-R Version en_2...
- Page 7 3. Transportation temperature shall be of –50°C to +50°C at the relative humidity of 5% up to 98%. 9. Disposal Detector disposal shall be carried out according to electronic household appliance disposal rules established by the legislation of the State, where the product is operated. Smoke-R Version en_2...
- Page 8 Manufacturer: ORTUS Group 1 East Liberty, 6th Floor Reno, NV 89501, USA Tel.:+1 650 240 27 62 mail: info@ortus.io http://www.ortus.io Smoke-R Version en_2...
Need help?
Do you have a question about the Smoke-R and is the answer not in the manual?
Questions and answers