INSTALLATION III (IN EXISTING CONSTRUCTION) CONTINUED
Remove the 2 square knock-out carefully from surface
of the frame by screw driver ( Fig.19) .And remove the
bracket cover on the other side of the frame body.
Insert fan body into ceiling as shown in Fig.20.
Secure the fan body to the adaptor by using one thumb screw
as shown in Fig.21
Replace with clamp plates(accessories) and secure the fan
body on ceiling board with 2 screws from inside of the frame.
(Fig.22)
2-square knock-out
Hand driver
Claws
Body
Adapter slots
Ceiling joist
2-Screws
Clamp plate
Fan body
Fig. 19
Ceiling
Fig. 20
Fan body
Fig. 21
Ceiling
Fig. 22