Related Manuals for Lanpro LP-5ai
Summary of Contents for Lanpro LP-5ai
- Page 1 Wireless - Equipment LP-5ai 123 Configuration Manual in Client Mode. LP5ai_M123_ENB01W LP-5ai 123 Configuration Manual in Client Mode. www.lanpro.com...
- Page 2 Wireless - Equipment - 5.8 GHz - LP-5ai 123 Configuration Manual in Client Mode The following Instruction Manual will guide you on how to configure the LP-5ai in Client Mode. Once the Setup 123 Manual has been executed, (document: Connect an UTP cable from the: To Ethernet port of the PoE injector to the Switch or PC as shown in figure 2.
- Page 3 In the window shown in figure 5, select: Use the following IP address and input an IP address in the range of IP set by default of the LP-5ai. In this example, we have selected address: 192.168.1.201, the LP-5ai has a default address of 192.168.1.1, input 255.255.255.0 in: Subnet Mask, in: Default gateway input the destination router address, in:...
- Page 4 Wireless - Equipment - 5.8 GHz - LP-5ai 123 Configuration Manual in Client Mode In the window shown in figure 8, input the word admin in: Name and the word: password in: Password and then select: Login now. Figure 8 Then, as shown in figure 9, please proceed to change the IP address of the equipment.
- Page 5 Wireless - Equipment - 5.8 GHz - LP-5ai 123 Configuration Manual in Client Mode In the window shown in figure 11, in the menu: Tools, proceed to select: Site Survey, locate the network you wish to connect to, then select it and click on: Select.
- Page 6 Wireless - Equipment - 5.8 GHz - LP-5ai 123 Configuration Manual in Client Mode In this example, we will generate the same keys of the AP and will establish the same ways of authentication and encryption. In order to do this, in figure 14, in...
- Page 7 Wireless - Equipment - 5.8 GHz - LP-5ai 123 Configuration Manual in Client Mode Enter in the AP and verify option: Connections that the LP-5ai client is connected. Please see figure 16 b. Figure 16 b In the window shown in figure 17, proceed to change the In the window shown in figure 18, input in: Current administration password of the equipment.