RichardSolo TY001 Instruction Manual

38,000 mAh 3-USB/12V
DC Power Pack
Model: TY001
INSTRUCTION MANUAL
Thank you for purchasing the RichardSolo 38,000 mAh 3-USB/12V DC Power Pack. Please read these
instructions before operation and save for future reference.

Charge Power Pack

Insert round-pin AC adapter cord (9) into Power Pack
1
input port (3).
Plug 110/240V adapter (9) into AC wall outlet.
2
Power pack will automatically begin to charge.
3
Note: LEDs may not provide an accurate reading while Power Pack is recharging. For optimum performance, make sure all LEDs have stopped
flashing and remain solid to ensure full charge capacity. Power Pack must be charged separately – it does not tandem charge with devices.
Questions? Please email us at: RichardSoloHelp@gmail.com
2301 Kerner Blvd. Suite C, San Rafael, CA 94901, USA

Battery Layout

2
Power / LED light / Emergency flasher button
7
1
4 charge capacity indicator LEDs (blue)
1
2
4
AC adapter power input port (round-pin)
3
5
USB output 3: 5V/2.1A
4
6
USB output 2: 5V/1A
5
3
USB output 1: 5V/2.4A (Smart)
6
12V 15A round output socket
7

LED light / Emergency flasher

8

Included accessories

(not shown)
110/240V AC adapter with power cord
9
Soft travel case
8 10
Four LEDs (2) flash in 25% increments and remain solid
4
when corresponding capacity is reached.
Total recharge time (0% - 100%) = about 7 hours.
5
www.RichardSolo.com