Advertisement
Quick Links
EN
METAL CASE KIT AND AESTHETIC PANEL KIT FOR BUILT-IN
Warnings
This instruction is an integral part of the booklet of the
appliance on which the kit is installed. Please consult this
booklet for general warnings and fundamental safety
rules.
List of accessories
Metal casing:
• L01045II - Galvanized metal case for built-in installation for
SWI 400 models
•
L01046II - Galvanized metal case for built-in installation for
SWI 600 models
• L01047II - Galvanized metal case for built-in installation for
SWI 800 models
Assembly the built-in installation kit
The kit can be installed in the vertical position only.
Installation arrangement
To install the unit, prepare the wall for housing the metal cas-
ing.
Make sure that the support wall is able to support the
weight of the appliance.
INSTALLATION
For a rapid and right assembly of the components follow
carefully the sequences described in the various sections.
All the operations must be performed by qualified person-
nel using the required Personal Protective equipment.
exterior panel:
• L01092III - Aesthetic panel fully aligned with the wall for
SWI 400 models
• L01093II - Aesthetic panel fully aligned with the wall for
SWI 600 models
• L01094II - Aesthetic panel fully aligned with the wall for
SWI 800 models
Make sure that the wall is not crossed by pipelines,
load-bearing construction elements or power lines.
H
P
N420311A-Rev.03
L
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Innova Filomuro incasso L01045II
- Page 1 N420311A-Rev.03 METAL CASE KIT AND AESTHETIC PANEL KIT FOR BUILT-IN INSTALLATION Warnings This instruction is an integral part of the booklet of the For a rapid and right assembly of the components follow appliance on which the kit is installed. Please consult this carefully the sequences described in the various sections.
-
Page 2: Box Installation
N420311A-Rev.03 Code L01045II L01046II L01047II Target device SLWI 400 SLWI 600 SLWI 800 Height Width 1140 1340 Depth Box installation The metal casing is equipped with pre-cuts in correspond- – insert the metal casing into the wall hole ence with the hydraulic and electrical connections of the appliance. - Page 3 N420311A-Rev.03 Plaster holder mesh Skimming Aesthetic panel attachment holes When leveling the wall, check that the following internal di- mensions of the metal casing are present: Filomuro built-in Filomuro built-in Filomuro built-in Models m.u. Internal metal casing dimensions Total widh 1108 1308 Total height...
- Page 4 N420311A-Rev.03 Metal casing Fixing brackets – assemble the unit – check right attachment to the brackets Fixing brackets fancoil unit Aesthetic front panel installation – bring the aesthetic panel closer to the formwork – hook the lower part of the panel using the hooks provided in the formwork...
- Page 5 N420311A-Rev.03 Aesthetic panel attachment holes Aesthetic front panel – bring the top of the aesthetic panel closer to the form- – secure the hinges using the screws provided work Make sure that the flap on the unit is aligned with the –...
- Page 6 N420311A-Rev.03 This instruction is an integral part of the booklet of the appliance on which the kit is installed. Please consult this booklet for general warnings and fundamental safety rules. Refer to the appliance manual also for the connection and testing phases.
Need help?
Do you have a question about the Filomuro incasso L01045II and is the answer not in the manual?
Questions and answers