Philips 64PP9751 Set-Up And Quick Use Manual page 4

S
ETUP
1
ok) button on the Pronto
S
AUTOMATIC ETTINGS
remote, or the (M)enu button
on the PTV control panel.
F irst Time Setup auto-
matically takes care of
An on-screen list of TV fea-
some basic TV control set-
tures shows on the "MAIN
tings for you. Follow the
MENU".
steps in this section to quick-
ly add area channel numbers
into the TV's memory, and set
the TV for your connected
signal (Antenna or Cable.)
You can also set the GUIDE
Plus+ ® system feature (if
desired).
MAIN MENU
PICTURE SOUND
2
FEATURES
1ST TIME SETUP
EXIT
3
1 mute
3
MENU/
SELECT channel
HDR PTV + +
1
Menu Source
volume
+ +
ok
Exit
3/5 INFO A/CH
2
Please check that your
other antenna or cable is
connected to the plug
marked ANT B on
the TV rear input panel.
Press STATUS to Quit
or
Press "M" to Continue
Please thoroughly read
the section in your
owners manual which
details the proper setup
and operation of the
Surround-Sound System.
Press "M" to Continue
Note: Convergence
(or lining up of red
and blue light paths
PRESS TO ALIGN RED
on the TV screen)
PRESS MENU TO RETURN
has been preset at
the factory for your conve-
nience and should not need
any further adjustments.
DIGIT 2, 4, 6, 8 TO MOVE CURSOR
However, Convergence con-
PRESS MENU NOW TO CONTINUE
trols are provided (in both the
First Time Setup and Picture
Menu areas) in case the picture on your TV shows color fringing.
Color fringing is when colors "bleed" or appear around the edges
of onscreen images and objects. Please refer to the TV's Picture
Menu Convergence control page section for further details.
S H
MART ELP
• Press the EXIT button on the
remote or PTV to stop the
SETUP at any time.
H U F
OW TO SE
2
Press the MENU (or
Select "1ST TIME
SETUP" on the Main Menu.
(Selected MENU item is
highlighted in RED.)
Press the remote's Menu
buttons to move UP/DOWN
and from SIDE-TO-SIDE
within the list of on-screen
features.
Press CH(annel)
VOL(ume) (+) (-) on the
PTV keyboard to also move
UP/DOWN and from SIDE-
TO-SIDE within the list of
on-screen features.
The First-Time Setup Many of the current TV
provides a simple method control settings will be
modified by continuing
of adjusting the most
important controls for with First-Time Setup.
this television receiver.
Press STATUS to Quit
Press "M" To Continue
Press "M" to Continue
Please check that your
main antenna or cable is * Please Wait *
connected to the plug
OR
OR
System is testing for
marked ANT A on
the TV rear input panel. correct tuning mode
Press STATUS to Quit
or
Press "M" to Continue
* Please Wait *
* Please Wait *
System is searching for
System is testing for
all active channels
correct tuning mode
for ANT B.
Testing channel 2
1
in cable mode.
STOP
10:17a
PLEASE REFER
CONVERGENCE MENU
TO YOUR
ALIGN RED
ALIGN BLUE
GUIDE PLUS+
Where do you live?
CONVERGE MULTI POINT
INSTRUCTION MANUAL
BACK
FOR DETAILS ON
1st TIME SETUP.
Press color key to select
CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
PRESS TO ALIGN BLUE
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
PRESS MENU TO RETURN
BACK
CONVERGE RED POINTS
USE TO ADJUST
MENU TO RETURN
• Remember, SETUP is a first -use, one-
time operation and will not have to be
repeated.
T S
IRST IME ETUP
3
Press the Menu (or ok)
button on the remote (or the
Menu button on the PTV) to
begin SETUP.
Follow the instructions
shown on the TV screen to
guide you through the First
Time Setup and use of your
new HDR PTV.
and
Press " " to select the
language you would like
the TV displays to use.
ENGLISH
˜
ESPANOL
FRANCAIS
or
Press "M" to Continue
* Please Wait *
System is searching for
all active channels
on ANT A.
for ANT A.
Testing channel 2
1
in cable mode.
The search for active
channels is complete
for ANT B.
on ANT B.
17 channels were found
and saved in memory
.
Press "M" to Continue
After ALL connections
TV GUIDE PLUS +
Setup and First-Time Setup for
the GUIDE PLUS+ system
®
are completed, the TV
will have to be turned
B USA
Y CANADA
OFF overnight to receive
program information.
Note: The GUIDE Plus+
an electronic program service avail-
able with your set to show you cur-
rent and future TV listings; program
content descriptions, and other pro-
gramming information. Your TV may display a GUIDE Plus+ sys-
tem demonstration mode when first turned on for normal opera-
tion and use. Pressing the TV's control panel or remote control
buttons will enable you to bypass the demonstration and continue
with normal TV program viewing.
Remove the GUIDE Plus+ Demo Mode Pin (tag label attached to
the "G-LINK" connection plug at the rear of TV) when setting up
the GUIDE Plus+ system for use (and to completely disable the
automatic demo). Follow the instructions contained in your sepa-
rate GUIDE Plus+ information manual for feature installation and
other operation details.
• Even if there is no Antenna or Cable
signal connected to the ANT(enna) B
input (located on the rear of the PTV),
1st Time Setup will still attempt to add
channels into memory for that source.
4
This TV is equipped with
the TV Guide Plus+ feature.
This feature is designed
to operate only on the
main antenna, ANT A.
Press "M" to Continue
The search for active
channels is complete
for ANT A.
17 channels were found
and saved in memory
.
Press "M" to Continue
This TV is equipped with
a Surround-Sound system.
Surround Sound requires
the use of additional
speakers being placed
around your room.
Press "M" to Continue
This completes the
First-Time Setup.
Press "M" to Exit Setup
® system is
®
In such cases, a channel search in the
Antenna Mode will be completed, and
"0 channels saved in memory" will be
displayed on-screen.