Page 1: Table Of Contents
Read This Manual Before Installing Electric, Gas & Cooktop Stove Models When properly cared for, your new iGuardStove has been designed to be safe and reliable. Do not disassemble any of the components. There are no user serviceable parts inside.
Page 2: Specifications
While connecting the Power Box you should see LED colors inside the metal enclosure: Amber – Power Box is powered but isn’t communicating with the Control Panel • Contains Transmitter Module: Green – Confirms that a Control Panel is connected and the iGuard Stove is fully operational • FCC ID: AZY-HF-LPB100 •...
Page 3: Basic Install Layout
Panel is connected to the Power Box the light will turn green. If there are problems the light will turn red. 6. Make sure the iGuardStove power box and cables are out of the way and against the back wall. Slide iGuardStove Cooktop - Hardwired the stove back into place.
Page 4: Wireless Setup
Setup and then chose “Connect with WPS” option. Press “Select” and then press the WPS button on your router and 5. Make sure the iGuardStove gas valve and cables are out of the way and against the back wall, and then wait until they connect.
Page 5: Device Menu Options
Handy Tip: To access the settings press and hold the Menu button for 2 seconds The iGuardStove works best when motion sensor has the best view of the highest traffic area in the Handy TIP: kitchen. Mount the control panel on the busiest side of the stove.
Page 6: Operating The Iguardstove - Electric & Gas
To stop cooking simply turn the stove knob off as you normally would and that’s it. After 4 minutes of an inactive stove the iGuardStove will go to sleep to wait until the next time you start to cook. There are 2 sensors to detect unburned gas. One is in the control panel for lighter natural gasses that 6.
Page 7: Register New Account
Register a New Account iGuardStove will wake up and the screen will come on when it senses you are in the area. If you are simply coming into the kitchen for other reasons then it will work as a motion controlled night light.
Page 8: Add Your Iguardstove To Your Online Account
Then 3 page buttons named History, Settings and Alerts • 3. Name – This is where you will name your iGuardStove so you can identify it if you have multiple devices. click the “ Add a Device ” button at the bottom and follow the instructions on page 16.
Page 9: Auto Shut Off Timer
Typically the iGuardStove for electric stoves is automatic. When you turn the stove knob the stove starts. When you return to the kitchen after its automatically shut off the stove the iGuardStove will the iGuardStove will shut off the stove automatically. The default from the factory is 5 minutes. You automatically turns the stove back on.
Page 10: Late Night Lock
Just check the day of the week and then select to times Disable “ Bypass iGuardStove ” – In the devices screen Menu you will find a “ Bypass iGuardStove ” you want the Lock to operate between.
Page 11: Room Temperature Alerts
Room Temperature Alerts History – Calendar View The temperature sensor is designed to warn you if the ambient temperature in the kitchen area is This Calendar view gives you a quick way to see what's been happening with the stove in the last getting to dangerous levels either too high or too low.
Page 12: History Daily View
It will only do this once per day after the Wake Time. This is a great peace of mind feature of your iGuardStove.
Page 13: Contacts List
Loss of Communication – If your iGuardStove looses connection with the server it might be because the router is offline or something else. The iGuardStove will go through a series of procedures over the next 6 hours to re-establish communications with the server and if it can’t restore communication the server will send out an alert stating the “...
Page 14: Commercial Account Add A Manager
Online Account - Add a Manager Managers & Primary Caregivers Permissions With your Account you have the ability to add Managers and/or Primary Caregivers who will have There are 2 types of Managers that are different from a Contact that only gets Alerts. their own online password protected access to the stoves and the settings.
Page 15: Manager Permission (Cont.)
Refund & Return Policy Managers & Caregiver Permissions (cont.) We do not accept returns or exchanges unless the item you purchased is defective. If you receive a The next window is where you choose whether the person is Manager or Primary Caregiver. You defective item, please contact us at sales@iGuardFire.com or 844-859-3838 with details of the product...
Page 16: Warranty Policy
Products or software with any other product. The Buyer shall not, directly or indirectly, alter, modify,...

iGuard iGuardStove User & Online Features Manual

Quick Links

TABLE OF CONTENTS

Getting Started

Summary of Contents for iGuard iGuardStove

Table of Contents