Advertisement
Quick Links
WATSON DESKING
FASTENER KEY
1"
Step 1
Seiri screen attaches
to desk with six
#10 x1" wood
screws (FIG-1)
provided.
Note:
M2 desks have pilot
holes for attaching
the Seiri screen.
Fusion desks do not.
Step 2
Please note spacing
between center of
Seiri Screen bracket
and edge of desk.
Note:
When installed,
cords can pass
under the tray and
behind the table.
Step 3
Put Seiri bins on the
accessory rail.
Please leave this
page for the end user.
Page 1 of 1
800.426.1202
#10 x 1"
wood screw
www.watsondesking.com
PRODUCT INSTALLATION:
Desk Mount Seiri Screen - FAPRS, FARPD
1/2"
M2 / FUSION
M2 / FUSION
1/2"
1"
INS21320
Advertisement
Summary of Contents for Watson Desking FAPRS
- Page 1 PRODUCT INSTALLATION: WATSON DESKING Desk Mount Seiri Screen - FAPRS, FARPD FASTENER KEY #10 x 1" wood screw 1" Step 1 Seiri screen attaches to desk with six #10 x1" wood screws (FIG-1) provided. Note: M2 desks have pilot holes for attaching the Seiri screen.
- Page 2 PRODUCT INSTALLATION: WATSON DESKING Wall Mount Seiri Screen Step 1 Wall hung units are pre- assembled. Steel cleats are attached to the walls studs directly whenever possible or with "molly bolts" when apporpriate. Wall fasteners are not included in hardware kit.