Assembly Instructions - HOMCOM 700-105 Assembly Instructions Manual

White to White
Red to Red

Assembly Instructions:

1) Position the armchair back so that it
fits into the seat,you will hear a "click"
when it is in place.
2) Connect the massage and heating supply
cable pins.Fit the pins properly in the manner
shown in the image. Do not force
them,they only have one correct position.
The pins must be connected correctly.If the arm
3)
chair starts working when you finally turn it on and
doesn't stop,it will be because the pins have been
connected the wrong way round.If that should
happen,turn the power off and connect the pings
correctly.
pull out the trigger on the right side of the chair
4)
and the footrest will extend,push the backrest with
your back contiuously until it reachs the maximium
degree. NOTICE: THE BACK CAN'T MAINTAIN IN THE
MAXIMIUM DEGREE WITHOUT PUTTING A WEIGHT
ON I T