Page 2
Wait for TWO minutes. This will allow the system to recognize the plugged data logger(s). 2. Find DSP-1 and Create Connection from SiteView Launch SiteView software in PC side and click “USB Server” tab: Click “Search” button: In the pop-up dialog click “OK” button to continue.
Page 3
4. Change Access Settings from Admin Portal In the above steps, we assume DSP-1’s settings are: Port: 5678, Password: 12345. You can change these default settings from the admin’s portal web page by entering the admin’s address in the address box of a web browser:...
Page 4
If you have changed the above settings for a DSP-1 and you want to communicate with it from SiteView, SiteView-Web or Pluto, you must use the same settings when you create a connection for it.
Page 5
Microedge Instruments Inc. 404 – 1688 152nd Street Surrey, BC Canada, V4A 4N2 Toll Free: 1.877.352.9158, Fax: 778.807.5098 www.microedgeinstruments.com info@microedgeinstruments.com...