Mercedes-Benz Mercedes-AMG GT 2021 Owner's Manual page 177

174 Driving and parking
174
Inf Infor ormation on t mation on the AMG cer he AMG ceramic high-perf amic high-perfor orm- m-
ance com ance composit posite br e brak ake syst e system em
The brake system is designed for heavy loads.
This may lead to noise when braking. This e ect
can also occur a er washing the vehicle.
The noise depends on the following factors:
speed
R
brake force
R
environmental conditions, e.g. temperature
R
and air humidity
%
Have the brake system checked at a quali ed
specialist workshop a er it has been subjec-
ted to extreme loads.
ECO st EC O star art/st t/stop function op function
EC ECO st O star art/st t/stop function op function
%
Depending on the engine, the ECO start/stop
function is not available in all drive programs.
Observe the status display in the instrument
display for this.
%
Plug-in hybr Plug-in h ybrid: id: This function is not available.
The engine is switched o automatically in the fol-
lowing situations if all vehicle conditions for an
automatic engine stop are met:
You brake the vehicle to a standstill in trans-
R
mission position h or i.
V V ehicles wit ehicles with a 48 V on-boar h a 48 V on-board electr
R
t t em: em: You depress the brake pedal when travel-
ling at a low speed.
If the system has detected one of the following
situations, the engine will not stop:
You stop at a stop sign and there is no vehicle
R
in front of you.
The vehicle that stopped in front of you starts
R
up again.
You manoeuvre, turn the steering wheel
R
sharply or engage reverse gear.
%
If the system detects an intelligent stop inhibi-
tor, for example, a stop sign, the engine will
not stop.
If you activate the HOLD function or engage
the park position j, the engine can be
switched o in spite of an intelligent stop
inhibitor.
The engine restarts automatically in the following
cases:
You engage transmission position h or k.
R
You depress the accelerator pedal.
R
The vehicle requires an automatic engine
R
d electrical sy ical sys- s-
start.
You release the brake pedal.
R
V V ehicles wit ehicles with a 48 V on-boar
R
t t em: em:
You release the brake pedal on a downhill
-
gradient and the vehicle does not roll.
The vehicle rolls on a downhill gradient and
-
does not automatically enter glide mode at
20 km/h.
ECO start/stop function symbols in the instru-
ment display:
The symbol è (green) appears when the
R
vehicle is at a standstill: The engine was
switched o by the ECO start/stop function.
The symbol ç (yellow) appears when the
R
vehicle is at a standstill: Not all vehicle condi-
tions for an engine stop have been met.
h a 48 V on-board electr d electrical sy ical sys- s-