Table of Contents
Advertisement
Setting Brightness
• As you enter the picture menu, Brightness will be the first
selected option.
• Press “ ” button to increase brightness.
• Press “ ” button to decrease brightness.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Setting Contrast
• Using “
” or “
” button select Contrast.
• Press “ ” button to increase contrast level.
• Press “ ” button to decrease contrast level.
Setting Colour
• Using “
” or “
” button select Colour.
• Press “ ” button to increase colour level.
• Press “ ” button to decrease colour level.
Setting Sharpness
• Using “
” or “
” button select Sharpness.
• Press “ ” button to increase peaking level.
• Press “ ” button to decrease peaking level.
ENG-(C15F27)-1531-AV-1243-AK30-MN1P-PLLFS-BSI-50078143.p65
All manuals and user guides at all-guides.com
9
Setting Hue
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
• Using “
” or “
” button select Hue.
• Press “ ” button to increase hue level.
• Press “ ” button to decrease hue level.
Center value is indicated with the two reciprocal arrows.
Mode
This item is used to change the picture size.
By pressing “ ” or “ ” button you may choose one off three
options. These are, “4:3”, “16:9” and “AUTO”.
• 4:3 This option forces the picture ratio to 4:3 mode.
• 16:9 This option forces the picture ratio to 16:9 mode.
• AUTO This option is available only if your TV has WSS feature.
This allows to change the picture mode automatically, ac-
cording to the transmission of the selected channel. For
example, your TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the AUTO mode, the TV
is switched to 16:9 mode automatically. If the TV is in 4:3
mode and the picture ratio of the channel is also 4:3, there will
be no affect selecting the picture mode to AUTO mode.
WSS feature is only used in TV modes. For the Picture Mode
selection in AV-1 the pin 8 (of Scart) value is used. In RGB
modes the Picture Mode can be 4:3 or 16:9 (Auto mode is not
available.).
To Store the Settings
• Press “ ” or “ ” button on STORE option to store Picture
menu settings.
The stored picture mode setting will be valid only in current
program. However, the other stored values in Picture Menu will
be valid for all the programmes
GB - 9 -
18.11.2005, 08:40
Advertisement
Table of Contents
