Optelec ClearView+ User Manual page 14

Optelec
 When moving the ClearView
the monitor from the base unit for safe and easy
transportation. Carry the ClearView
two grips located on either side of the base unit table mid-
way between the front and back of the unit at table level.
 Always turn the power off when the CV
 Always unplug the CV
cloth to clean the exterior surfaces. Do not use any
cleaning agents or any abrasive materials as these will
damage your CV
 Only use the mains power supply provided.
14
+
+
before cleaning it. Use a soft, damp
+
.
to another location, remove
+
base unit by using the
+
is not in use.
+
ClearView
English