Download Print this page

PedalPCB Pineapple Quick Start Manual

Download this manual

Controls

• Gain – Sets the amount of signal gain

• Tone – Adjusts the high frequency content

• Contour – Adjusts the overall frequency content

• Volume – Adjusts the overall output volume

• Modern/Vintage (Toggle switch) – Toggles between Vintage (dark) and Modern (bright) voicing

• Boost/Gain (Toggle switch) – Increases overall gain, more drive / heavier distortion

All trademarks and registered trademarks are the property of their respective owners. The company, product, and service names used in

this web site are for identification purposes only. Use of these names, logos, and brands does not imply endorsement.

Pineapple

Revision 04.15.19

Page 1 All trademarks and registered trademarks are the property of their respective owners. The company, product, and service names used in this web site are for identification purposes only. Use of these names, logos, and brands does not imply endorsement. Copyright © 2019 - PedalPCB.com...
Page 2: Parts List
TRIM2 50K (3362P Trim) 150p SWITCHES 470K SPDT (On/On) DPDT (On/On) TRANSISTORS J201 J201 J201 C100 220u J201 220K J201 J201 220K DIODES R100 D100 1N5817 Common offboard components (enclosure, footswitch, jacks, etc) are not listed Copyright © 2019 - PedalPCB.com...