Inserting An Expresscard Module - Sony VGN-AR21B User Manual

Inserting an ExpressCard Module

!
Your computer is delivered with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot for the first time.
Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.
You do not need to shut down your computer before inserting or removing the ExpressCard module.
To insert an ExpressCard module
1 Locate the ExpressCard slot on the right of the computer
2 Remove the ExpressCard slot protector.
On VGN-FE series models:
Push the ExpressCard slot protector to pop it out.
On VGN-AR series models:
1 Push the ExpressCard module release button so that the release button pops out.
2 Push the ExpressCard module release button a second time so that the ExpressCard slot protector pops out.
3 Gently take hold of the ExpressCard slot protector and pull it out of the slot.
4 Hold the ExpressCard module with the arrow facing upward and pointing toward the ExpressCard slot.
5 Carefully slide the ExpressCard module (1) into the slot until it clicks into place.
Do not force it into the slot.
!
Insert the ExpressCard slot protector to protect against debris entering the slot when not using an ExpressCard module. Before moving your computer,
make sure to insert the ExpressCard slot protector into the slot.
(page 15).
n 63 N
Using Your VAIO Computer