Download
Share
Print this page
velocomp PowerPod Instructions Manual
  1. Manuals
  2. Brands
  3. velocomp Manuals
  4. Measuring Instruments
  5. PowerPod
  6. Instructions manual

velocomp PowerPod Instructions Manual

Hide thumbs Also See for PowerPod:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
PowerPod Instructions
Version 1.0.3
August 11 2015

Advertisement

loading
Need help?

Need help?

Do you have a question about the PowerPod and is the answer not in the manual?

Questions and answers

Related Manuals for velocomp PowerPod

Summary of Contents for velocomp PowerPod

  • Page 1 PowerPod Instructions Version 1.0.3 August 11 2015...
  • Page 2 What’s In the Box Your PowerPod includes three items: 1) PowerPod sensor 2) PowerPod mount and mounting hardware 3) USB cable Additional items you must supply separately: 1) ANT+ bike computer with power display (such as Garmin, Brighton, Timex, etc)
  • Page 3 (SOLID). For example, the status light FLASHES RED continuously whenever the PowerPod is connected to a USB charger and its battery is being charged. The status light goes out when the battery is fully charged. Copyright Velocomp LLC 2005-2015...
  • Page 4 DO THIS FIRST: CHARGE POWERPOD SENSOR Before beginning the setup of your PowerPod, we recommend that you fully charge the PowerPod’s internal battery. 1) Attach the USB cable to the USB port of your PowerPod. 2) Plug the USB cable into your USB charger.
  • Page 5 PowerPod. After 8 seconds the status light turns off automatically. Click the button at any time to turn the light back on. If your PowerPod is new and has not yet been paired to any speed sensor, the status light will show SOLID RED (red light does not flash on and off).
  • Page 6 4. First ride—PowerPod self calibration Your PowerPod and bike computer are now ready for a 5 minute self- calibration, after which PowerPod will measure your cycling power! 1) Attach the PowerPod sensor to its mount.
  • Page 7 1) Purchase a PowerPod mount for each bike, and install the PowerPod mount according to instructions 2) Attach the PowerPod sensor to the bike you are using for today’s ride 3) Move your bike at least 100 feet away from any other bike with an...

  • Page 8: Troubleshooting

    CONTINUOUSLY for 10 seconds, until status light turns on, then release button. b. If the status light doesn’t turn on after the hard reset, PowerPod battery is dead. Charge the PowerPod (see page 4) 2) When I click the button, the status light FLASHES RED a.
  • Page 9 Self calibration happens any time you pair your PowerPod to a new speed sensor. b. If your PowerPod mount has rotated on your handlebars, or you have moved (rotated) your bike handlebars, power readings will be “off”...