Mixer Section - Cherry Surreal MG-1 Plus User Manual

8 Mixer Section

Bell Tone- Sets the level of MG-1 Plus' pseudo ring mod section*. This multiplies the signals
of Source One and Tone Source Two together, typically resulting in a metallic tone with
inharmonic overtones often used to recreate pitched percussion instruments such as bells
and chimes. Manipulate the Tone Source Octave controls and Tone Source Two's Detune
knob to best hear its effects.
Poly- Sets the level of the Poly section. It does not want a cracker.
Master Volume and meter- This isn't in the Mixer section, but it sets MG-1 Plus's final
volume. The meter is a five-LED affair and should be set like any other meter; it should
nominally sit around the third and fourth LED from the bottom.
Cherry Audio: Surreal MG-1 Plus User Manual
The Mixer section is where all MG-1 Plus
signals are mixed together before going to
the Master Volume control and onto the
output.
Tone One- Sets the level of Tone Source
One.
Tone Two- Sets the level of Tone Source
Two.
Noise- Sets the level of the Noise generator.
We haven't mentioned the Noise generator
up to this point, because it has no other
controls, but it creates random noise
containing all frequencies at relatively equal
amplitude. Like the Tone Sources, the Noise
generator is routed through the filter and
amplifier.
Page 15