Sony VAIO PCG-V505CP Hardware Manual page 69

Connecting peripheral devices
Connecting a USB mouse
To connect a USB mouse, proceed as follows:
1 Choose the USB connector (1) you prefer to use.
2 Plug the USB mouse cable (2) into the USB connector.
You can use your USB mouse (3).
The VAIO USB mouse software driver is preinstalled on your computer, therefore, you only need to plug the USB mouse into the USB connector and
you can start working.
Connecting a USB floppy disk drive
As an optional extra, you can purchase a USB floppy disk drive and connect it to your computer.
To connect a USB floppy disk drive, proceed as follows:
1 Choose the USB connector you prefer to use.
2 Plug the USB floppy disk drive cable into the USB connector. The VAIO logo on the disk drive should be
facing up.
Your USB floppy disk drive is now ready for use.
n N
68