Page 2
Congratulations, You have just purchased the best ultrasonic cleaning system available to the market today. We here at Ultrasonic Power Corporation take pride in our products and our ability to provide our customers with the best quality service available. Please take some time to familiarize yourself with this manual and all aspects of the system configuration prior to start-up.
Page 5
WARNING: Use only water or water-detergent mix in tank. Never use flammable solvents (fire or explosion could result) or carbon tetrachloride (produces toxic fumes). CAUTION: Never use ultrasonic cleaning console as a sink. Under no circumstances should waste water be poured into it as the water could overflow the drain and damage delicate components.
Ultrasonic vibrations are similar to audible sound, but the frequencies used are generally above a level that can be heard (>18 kHz). Since sound is a compression wave, the action of this high frequency energy in a liquid may be considered as the rapid generation and violent collapse of minute bubbles.
Page 13
5. Tank Power On – On the tank, turn ON the main power switch. 6. Ultrasonic Power On – On the digital controller, press the “F” key to turn on the internal generator. (DO NOT turn on the ultrasonics without having liquid in the tank, doing so will damage the ultrasonic transducers).
Page 15
NOTE: When first learning the capabilities of this system, do no leave items unattended in the tank for long periods. The system may damage the object if it remains in the ultrasonic tank for extended periods of time. Longer cleaning times can be used after thorough testing has been completed.
Page 16
Note: Water and basket will both be HOT. Take care when removing basket and items from tank. 12. Power off – Rotate the "Power Intensity" dial counterclockwise (ultrasonic sound will decrease) and turn OFF the main power switch. 3.4. Filter Operation (Optional Accessory) 1.
UPC recommends calibrating. They may be sent back to Ultrasonic Power Corporation for calibration on an annual basis. Please request an RMA number before shipping the generators back to the manufacturer.
4. The pump does not work. d. Loose housings e. Switches and settings If the problem has not been solved using the trouble shooting guide, call the Ultrasonic Power Corporation service department at (815) 235-6020 7:00 AM - 3:30 PM CST Monday - Friday.
Page 21
4. Check supplied power for correct voltage specifications. 5. Test generator by turning the system on. 6. If generator does not work, contact Ultrasonic Power Corporation service department for repair or replacement. NOTE: DO NOT open the generator as this will immediately void the warranty of the generator.
Page 22
3. Check heater pad for proper contact with the system tank. 4. Check for loose or damaged wires. If damage is visible, contact Ultrasonic Power Corporation service department for repair or replacement. 6.5. PUMP, FILTER & PRE-STRAINER (OPTIONAL ACCESSORY) 1.
(10) years; all ultrasonic generators shall be free from defects in material and workmanship for five (5) years; all transducer components shall be free from defects in material and workmanship for two (2) years; and...
9. Return of Equipment Policy Replacement/Repair Policy and Pricing Schedule It is the intention of Ultrasonic Power Corporation (UPC) to deliver fair, accurate, cost-effective and timely service associated with warranty and non-warranty product assistance to Original Equipment Manufacturers (OEM), End- user and Reseller Customers within the guidelines of this Policy.