Table of Contents
Advertisement
Using the product recovery CD-ROMs
* If your system is severely damaged and you can no longer access Windows
power button for longer than four seconds. Wait for ten seconds before pressing the button again to turn the power on.
Recovering the system without changing partition sizes
To completely restore the original software, drivers and settings on your computer without changing the
partition sizes, choose the first option and apply a Default System Drive Recovery. Performing this recovery
means that you will lose all the data stored on your C: drive, but data on your D: drive will remain.
You should allow one hour for the recovery process.
To perform the Default System Drive Recovery, proceed as follows:
1
Select the button next to Default System Drive Recovery (Recommended).
2
Click Next.
You are asked if you are sure you want to recover the system.
3
To start the procedure, click Next.
4
Click Yes to confirm.
The recovery process starts.
5
When asked to do so, remove the CD and insert the next one.
6
When the process is finished, click OK.
7
Click Next in the window that appears.
8
Remove the CD from the drive and click Finish.
Your system is restored to its initial settings and reboots automatically.
Recovering the system with modified partition sizes
To have the option of changing the partition sizes before completely restoring the original software, drivers
and settings on your computer, choose Option Recovery.
®
, you will have to turn off the computer by pressing the
n N
114
Advertisement
Table of Contents
