Advertisement
Table of Contents
SIGNAL WORDS
This manual classifies personal injury risks and situations that might cause property damage with
signal words. Signal words indicate the seriousness of injuries that might result if a particular act does,
or does not, occur.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
HAZARDS
Vestil strives to identify all foreseeable hazards associated with the use of its products. However, no
manual can address every possible risk. The most effective means for avoiding injury are to read all of
the instructions before installing the rack and to apply sound judgement whenever using, inspecting,
and maintaining it.
If this product is used improperly or carelessly, the operator and/or bystanders might
sustain serious personal injuries or even be killed. ALWAYS use the product properly:
Read and understand the entire manual before assembling, installing, using or servicing the
•
product. Read the manual to refresh your understanding of proper use and maintenance procedures
whenever necessary.
Inspect the bicycle rack in accordance with the directions in the
•
Remove the rack from service if it is not in
DO NOT use the rack UNLESS it is securely anchored to the ground.
•
DO NOT remove or obscure any label. All labels must be readable. See
•
DO NOT modify the bicycle rack in any way. Unauthorized modifications automatically void the
•
Limited Warranty
on p. 4 and might make the rack unsafe to use.
BR-L2 DIMENSIONS AND BILL OF MATERIALS
Fasten the rack to the
5
ground using
/
" anchor
8
bolts of appropriate length,
i.e. selected by your
building/facility engineer.
Install the bolts through the
4 bolt holes in each foot
pad.
Item
Part no.
1
31-516-230
31-516-232
Table of Contents
Rev. 5/23/2019
Satisfactory
1
Description
Bicycle rack frame weldment:
BR-L2-BK (Black)
BR-L2-GAL (Galvanized)
Copyright 2019 Vestil Manufacturing Corp.
Inspections & Maintenance
Condition.
Qty.
1
BR-L2 Manual
section.
Labeling Diagram
on p. 3.
Page 2 of 4
Advertisement
