Advertisement
Quick Links
GATEWAY SOFA
Sofa Screen Installation
bottom mounting bracket
Locate slots in the back of the seat (marked in the drawing in red.)
If slot is not cut in the fabric, it will need to be done on site. To do this, press your finger to feel the void in the frame behind the
fabric. Make a 2 1/4" long slit in the fabric with a utility knife.
The screen has 3 mounting locations (shown in red). The two hooks on the top, hook onto a pin that will be revealed once the
fabric is cut in step 1. At the bottom of the screen, there is a metal plate with two 1/4-20 tapped holes. These will be used to
bolt the screen to the black flat bracket on the sofa.
Customer Support: 1.800.668.9318
Email: mail@nienkamper.com
Web: www.nienkamper.com
plate with tapped
holes
THIS IS A GENERAL ASSEMBLY GUIDE, NOT ALL CONDITIONS MAY APPLY TO YOUR
PARTICULAR INSTALLATION.
hook
Page 1 of 2
2 1/4"
2 1/4"
Advertisement
Summary of Contents for Nienkamper GATEWAY SOFA
- Page 1 GATEWAY SOFA Sofa Screen Installation 2 1/4” 2 1/4” bottom mounting bracket Locate slots in the back of the seat (marked in the drawing in red.) If slot is not cut in the fabric, it will need to be done on site. To do this, press your finger to feel the void in the frame behind the fabric.
- Page 2 The plate with tapped holes on the screen should rest on the bottom mounting bracket of the sofa. Attach the screen to the sofa with two 1/4-20 x 3/4” bolts. Customer Support: 1.800.668.9318 THIS IS A GENERAL ASSEMBLY GUIDE, NOT ALL CONDITIONS MAY APPLY TO YOUR Email: mail@nienkamper.com PARTICULAR INSTALLATION. Web: www.nienkamper.com Page 2 of 2...