Advertisement
LAMP® GS-GH5 Glass Pivot Hinge,
T hank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct
installation. Please keep this manual at hand for future reference.
h=t •Dii•:ii4,t•1•1•Ni
Door can be mounted with assembled hinges.
Horizontal door position is adjustable when mounted.
Vertical door position can be adjusted by adding
a washer or a spacer.
Ali hinges, brackets, and locks in the GS-series
follow the same design pattern.
é4=Ai4M11MHI
Door size
W600 x H900
Door weight
Max. 8 kg
5 or 6 mm (Door)
Glass
thickness
�:���;
Meaning of symbols
&
(S)
Prohibited
&
Caution
If not followed injury or damage may result.
0
Apply door stoppers to protect the hinges and glass door, when closing
0
Prepare a cabinet which can endure the weight of the door.
0
Use tempered glass. lt is recommended to use shatter-proof film on the glass. For areas where the glass brackets grip,
make sure to remove the shatter-proof film before installing.
Left opening
@
Required
■
SUGATSUNE
■
Glass door
■
■
Right opening
Hin e
1
Advertisement
Table of Contents
Summary of Contents for SUGATSUNE Lamp GS-GH5
- Page 1 Prepare a cabinet which can endure the weight of the door. Use tempered glass. lt is recommended to use shatter-proof film on the glass. For areas where the glass brackets grip, make sure to remove the shatter-proof film before installing. ■ ■ SUGATSUNE ■ ■...
- Page 2 1if @ M•tiit•U111ïMMi�itt-MiH! The images shown below are for a right opening door. A left opening door is the mirror opposite except with hinge A and B reversed on the left side. [1] Wood Cabinet Glass door &,-----..Apply a door stopper to protect the glass door from damage.
- Page 3 ■ Hinge GS-GH5 (Right opening) ■ Olnstalling pivot (iAssembling hinge parts Pivot with insert nut Surface mount pivot @Fix OKnock in I!] Door installation 1 Door installation 2 Do not use plain washe for surface mount pi ■ ■ SUGATSUNE ■ ■...
- Page 4 Door adjustment (±2.5 mm) Anti-clockwise Clockwise CAUTION-------.. Do not tum the adjustment screw beyond adjustment range. � ft CAUTION Do not use a motor screw driver) � Moveto left Move to right at front vlew. at front vlew. For doors wlth a cam Iock, check the movement of the cam when adjusting the door position.
Need help?
Do you have a question about the Lamp GS-GH5 and is the answer not in the manual?
Questions and answers