Table of Contents
Advertisement
Quick Links
CYL-EX-12-S, CYL-EX-12-E, CYL-EX-18-S & CYL-EX-18-E
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging; then inspect
the product closely to determine whether it sustained damage during transport. If damage is discovered during the
inspection, immediately record a complete description of the damage on the bill of lading. If the product is undamaged,
discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used
is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or
b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential damages
sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining this product.
Table of Contents
Product Specifications................................................................................................................................. .... 2
Signal Words............................................................................................................................................. .... 3
Safety Recommendations............................................................................................................................. .... 3
Anchor cabinet to the ground......................................................................................................................... .... 3
Loading the cabinet..................................................................................................................................... .... 3
Inspections & Maintenance........................................................................................................................... .... 4
Label Placement Diagram............................................................................................................................. .... 4
Limited Warranty......................................................................................................................................... .... 5
Copyright 2015 Vestil Manufacturing Co.
Series Cylinder Storage Cabinets
Assembly and Maintenance Manual
Rev. 1/24/2015
V
M
ESTIL
ANUFACTURING
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com
CYL-EX, manual.doc
C
ORP
e-mail:
sales@vestil.com
Page 1 of 5
.
Advertisement
Table of Contents
Related Manuals for Vestil CYL-EX-12-S Series
Summary of Contents for Vestil CYL-EX-12-S Series
- Page 1 1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used is exclusively the responsibility of the owner/end-user. 2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) Instructions in this manual; or b) Information provided on labels affixed to the product.
- Page 2 335.6 lb. CYL-EX-18-S 6 per shelf (18 tanks total) 32in. x 40in. x 68 152.5kg 304.2 lb. CYL-EX-18-E 6 per shelf (18 tanks total) 32in. x 40in. x 68 138.3 kg Copyright 2015 Vestil Manufacturing Co. Page 2 of 5...
- Page 3 Anchor the cabinet to the Door ground before loading the shelves. Slot for anchor bolt Loading the cabinet: Each shelf will hold 6 standard 20 lb. LPG cylinders stored upright. Base plate Copyright 2015 Vestil Manufacturing Co. Page 3 of 5...
- Page 4 Inspect the shelves: check for bends, warps, & cracks. Remove rust and reseal wherever necessary. Label placement diagram: (model CYL-EX-12-E shown) The cabinet should be labeled as shown below. Contact Vestil to order replacement labels. Label 203: Label 783: PROPANE EXCHANGE Label 287: Model &...
- Page 5 (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid. What is an “original part”? An original part is a part used to make the product as shipped to the warrantee.
Need help?
Do you have a question about the CYL-EX-12-S Series and is the answer not in the manual?
Questions and answers