Do you have a question about the 003-156 and is the answer not in the manual?
Questions and answers
Summary of Contents for Medic Therapeutics 003-156
Page 1
NECK PAIN MANAGEMENT LED LIGHT THERAPY User Manual...
Page 2
ABOUT: Red LED light has anti-inflammatory and anti-swelling properties, which can accelerate the healing of acute and chronic inflammations like, wounds and ulcers. LED red light is believed to improve cell metabolism and blood circulation, increase white blood cell phagocytosis (removal of pathogens and harmful cell debris) thereby improving immunity while accelerating cell repair.
PRODUCT SPECIFICATIONS: red light 630nm±10nm, Wavelength blue light 465nm±10nm Power density of single LED beam ≤10mW/cm² Power instability ≤10% Output power reproducibility ≤10% Rated input power ≤100VA Type of against electric shock Class I Degree of against electric shock Class B Waterproof IPX 0 Please do not use machine in the environment with explosive...
PART SPECIFICATIONS: The device consists of the LED module, light probe, timer and charging jack. Light Probe Light Probe Switch Indicator Light Charging Jack Light Probe On/Off...
Page 6
DEVICE STRUCTURE: 1. Connect the power cable to the device and power adapter, plug into outlet. 2. Open the device (see diagram) and place comfortably on the neck paying careful attention to direction of the opening angle and do not exceed the maximum angle. Do not forcefully stretch the silicone feature, otherwise the device can be damaged.
4. Press “On/off” for 3 seconds to turn the device off. The buzzer will “beep” and the blue indicator light will switch off. 5. The device will automatically switch off after 30 minutes. 6. When not in active use, the device will automatically switch off after 70 seconds.
ADDITIONAL INDICATIONS: Keep dry Fragile Caution Do Not Dispose CE Mark PRECAUTIONS: 1. Do not use if you are allergic to light. 2. If you are pregnant or if using on a child, always consult your doctor first. 3. Do not use in cases of cerebral hemorrhage.
TROUBLESHOOTING: Issue: Cause: Solution: Indicator light does not No power. Battery is Charge with correct come on after pressing damaged. Button is adapter. Contact and holding the damaged. manufacturer for On/Off button. repair information. LED light does not No power. LED module Make sure device illuminate.
MAINTENANCE: 1. If device malfunctions, refer to “Troubleshooting”. If the problem persists, contact the manufacturer. Do not disassemble or repair by yourself as your warranty will be voided. 2. Clean the device using a cloth and gentle cleaner. Do not use organic solvents, gasoline, etc. 3.
TRANSPORT AND STORAGE: Avoid vibrations, rain, snow, water or splashing during transportation. The device should be stored in a cool, low humidity (no more than 80%) environment with good ventilation. Avoid corrosive gas exposure. WARNINGS: 1. Do not look at the LED beam directly as serious eye damage can occur.
Please send your device, proof of purchase, and a check or money order in the amount of $35.00 made out to Medic Therapeutics to: Address: Medic Therapeutics Service Center...
Need help?
Do you have a question about the 003-156 and is the answer not in the manual?
Questions and answers