PHI PSE04 Quick Start Manual

PHI PSE04 Quick Start Manual

Multiple sound siren

Advertisement

Quick Links

Multiple Sound Siren PSE04
The PSE04 is a wireless siren, based on Z-Wave
Z-Wave
TM
plus product, it support the security, OTA... Those newest
features of the Z-Wave
TM
communication protocol designed for home automation, specifically to
remotely control applications in residential and light commercial
environments. The technology uses a low-power RF radio embedded or
retrofitted into home electronics devices and systems, such as lighting,
home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave
with other Z-Wave
TM
certified devices from other manufacturers and/or
TM
technology. It is the
technology. Z-Wave
TM
is a wireless
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
The device adopt the Z-Wave
network system is all made by Z-Wave
network system will have the advantages as below.
Concurrent multi-channel support reduces external interference.
Better RF range, improve about 10 meters in indoor.
Support 100 Kbps transmit speed, speed up communication.
Specification
Rating
RF distance
RF Frequency
RF Maximum Power
Dimension
Weight
IP classification
Operation temperature
Humidity
TM
network
FCC ID
Marking
1
TM
700 series chip, when your Z-Wave
TM
700 series devices. The
6VDC (AA Battery *4)
Min. 40M indoor,
100M outdoor line of sight,
868.40 MHz, 869.85 MHz(EU)
908.40 MHz, 916.00 MHz(US)
920.9MHz, 921.7MHz, 923.1MHz
(TW/KR/Thai/SG)
921.40 MHz, 919.80 MHz(ANZ)
869.00 MHz(RU)
865.20 MHz(IN)
916.00 MHz(IL)
+10dBm (Peak), -10dBm
(Average)
170mm(L) X 48mm (W) X 30(H)
205g
IP44; Outdoor use
-20 to 55° C
85%RH max
RHHPSE04
CE/NCC
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSE04 and is the answer not in the manual?

Questions and answers

Summary of Contents for PHI PSE04

  • Page 1 908.40 MHz, 916.00 MHz(US) 920.9MHz, 921.7MHz, 923.1MHz (TW/KR/Thai/SG) RF Frequency 921.40 MHz, 919.80 MHz(ANZ) 869.00 MHz(RU) The PSE04 is a wireless siren, based on Z-Wave technology. It is the 865.20 MHz(IN) Z-Wave plus product, it support the security, OTA... Those newest 916.00 MHz(IL) features of the Z-Wave technology.
  • Page 2: Troubleshooting

    Overview  Specifications are subject to change and improvement without notice. Troubleshooting Symptom Cause of Failure Recommendation The device can not The device may in a Z- Exclude the device join to Z-Wave™ Wave™ network. then include again. network For Instruction to http:// www.philio-tech.com...
  • Page 3: Battery Installation

    Battery Installation When the device report the low battery message. The user should replace the battery to new one. The battery type is AA, 1.5V Please loosen the screw on the back cover to release the front cover...
  • Page 4: Function Description

    2. Pressing tamper key three times within 1.5 seconds *notice1:The QR code can be found on the device to enter the inclusion mode. PSE04 or on the box. 3. After add successful, the LED will light ON 1 second This machine provides one groups of nodes. Each 1.
  • Page 5 * Tamper Report: Notice 1: The PSE04 must stay awake for at least 2 seconds after When the tamper key is pressed over 5 seconds. The device will into communicating, so therefore the more communication, the power the alarm state.
  • Page 6: Over The Air (Ota) Firmware Update

    Temperature The temperature differential to effect. Differential 0x00 0~127 report. Notice 3: The PSE04 must stay awake for at least 2 seconds after Report communicating, so therefore the more communication, the power Auto Report The interval time for auto report configuration NO.1, NO.4,...
  • Page 7: Z-Wave Supported Command Class

     Bit3: Reserve. Configuration Highest granted Security Class Bit4~7: Which sound id will Sensor Multilevel Highest granted Security Class play, when control form  Basic Highest granted Security Class controller. Sound ID 1~6, 0: Disable. Switch Binary Highest granted Security Class Notification Highest granted Security Class Battery...
  • Page 8: Fcc Interference Statement

    Philio Technology Corporation This transmitter must not be co-located or operating in conjunction with 8F., No.653-2, Zhongzheng Rd., Xinzhuang Dist., New Taipei City 24257, any other antenna or transmitter. Taiwan(R.O.C) w ww.philio-tech.com FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

Table of Contents